หมวดสินค้า >> Mechanical Equipment >> Mechanical / Electronic Force Gauge and Dynamometer >>
   
 
BGI - Hand Held Digital Indicator Overview
The BGI is a low cost digital force and torque indicator offering a fully automatic calibration to interchangeable force and torque
sensors. The LSS, LSSM, LSTJ and LSTE transducers come with a "personality" module that stores the calibration data. Simply plug the
transducer into the indicator and it is ready to use. This unique instrument packs many features including; Peak memory, RS232, ..Readmore..
 
 
AP 3000 - Dynamometer Overview
Virtually limitless, as a tension indicator, this AP Dynamometer is able to adapt itself to a variety of applications. The steel
shackles at either end of the steel beam of the Dynamometer serve as attachment points for rope, wire, cable, or other materials to be
tested. As force is applied to this instrument, it causes a steel beam to deflect which is translated into a linear reading. The ..Readmore..
 
 
AP 30001 - Dynamometer Overview
The AP 30001 is a mechanical crane scale designed to handle loads up to 50,000 lbs. This unit utilizes a specially designed alloy steel
beam that translates force to pounds. The full scale readings result from a beam deflection of only 0.026". The pinion and sector gears
are cut from stainless steel and hardened aluminum, which greatly reduces friction and wear. The pinion gear, sector gea ..Readmore..
 
 
U Force Gages - Slim Line Design Overview
The model U force gage is an accurate ±1% mechanical compression force measurement instrument. This gage employs a deflection
beam machined from aircraft quality alloy steel and heat treated to develop optimum strength and spring characteristics. A precision
dial indicator is mounted at the null point of this beam. The force is applied to a pressure fitting, mounted on the upper hal ..Readmore..
 
 
XC-Compression - Mechanical Force Gage Overview
The XC series mechanical force gage comes in eleven capacities ranging from 25 lb to 50,000 lbs and 10 to 20,000 kg. The XC features an
accuracy of ±1% full scale except the 25,000 to 50,000 lb (10,000 to 20,000 kg) capacities, which are ±2% full scale. The
load is applied against a hardened ball, which rotates to maintain vertical alignment as pressure increase. The ball is ..Readmore..
 
 
XPP - Tension/Compression - Mechanical Force Gage Overview
The XPP is available in seven capacities in pounds ranging from 50-0-50 up to and including 5,000-0-5000 and kilogram capacities
50-0-50 kg to 1000-0-1000 kg. Newton calibration is available as well. This gage achieves an accuracy of 2% full scale. Self-aligning
spherical rod-end connectors, for tension load, are supplied for capacities up to 1000 lb or 500 kg. The higher capacity models a ..Readmore..
 
 
XST - Tension Only - Mechanical Force Gage Overview
The XST mechanical force gage is offered in nine capacities, from 25 lb to 10,000 lb or 10 kg to 5000 kg. The accuracy is ±1%
full scale. Gages with capacities through 2000 lb are supplied with two rod-end connectors. Capacities greater than 2000 lb. are
equipped with shackles and pins. ..Readmore..
 
 
ESH/PSH - Mechanical Force Gages Overview
The ESH force gages are designed for high capacity measurements up to 500 lbs. These units are sold as complete kits, which include:
carrying case, handles, measuring attachments and extension shaft. Also included are four installation bolts for mounting the gage on a
test fixture or other locations. The rugged die cast metal housing and heavy duty springs will withstand the harsh rugged e ..Readmore..
 
 
FB/PS - Mechanical Force Gages Overview
The FB is designed with a cast aluminum housing and is rugged enough to withstand industrial environments, yet remain accurate to
±0.3% FB. The FB comes as a complete kit with, carrying case, five measuring tips, and an extension rod. The ergonomic design
makes it ideal for hand held use, or the gages can be mounted on a test fixture (four M3PO.5 threaded holes are located on the re ..Readmore..
 
 
GD - Gram Range Dial Gages Overview
The GD tension gage is an extremely simple device to use to measure spring tension, starting torque of motors and pressure of brushes
in electro-mechanical devices. The maximum reading pointer moves with the indicator when testing and will remain at the maximum force
measured. The gage's measuring spring is made of hard-tempered annealed beryllium copper. This alloy provides outstanding fl ..Readmore..
 
 
BG/EG - Digital Force Gage Overview
The BG digital force gage incorporates many user-requested features and specifications. The flexibility of the BG allows it to be used
in a variety of applications ranging from simple push-pull force measurement to being a part of a sophisticated system for process
control or automated testing. The BG is ideal for quality control, materials testing, muscle strength measurement, ergonomic s ..Readmore..
 
 
CG - Digital Force Gage Overview
The CG is ideal for heavy duty spring testing, destructive testing, and other application requiring up to 1000 lbs of tensile or
compressive force. The CG includes advanced features such as; RS232, Mitutoyo, analog outputs, full computer control averaging mode
external trigger, peak hold, programmable analog and digital filters and selectable units of measure. The gage is housed in an
..Readmore..
 
 
MG - Digital Force Gage Overview
The MG digital force gage is a miniature instrument offering a unique combination of ruggedness, small size and versatility. Its small
size and low cost make the MG an excellent choice for applications previously reserved for mechanical devices with an additional
benefit of a digital display, push-button zero and ease of use. Applications include puncture test, connector insertion/withdraw ..Readmore..
 
 
TX - Digital Tension Meter Overview
The TX digital tension meter is designed to measure tension on many different types of materials, including: wire EDM machines, tapes,
yarns and fibers. Model TX 1000, has resolutions adjustable to 1 gram, and the model TX 5000 has resolutions adjustable to 5 grams. The
speed of material can be displayed in feet per minute or meters per minute, or show length of part run in feet or meters. ..Readmore..
 
 
STX - Digital Strap Tension Meter Overview
The STX digital strap tension meter is designed to measure strap tension up to 1000 Ibs. The strap material and size may be selected
from the menu. The instrument automatically adjusts calibration to the correct setting. Real-time minimum and maximum values display
along with current tension values. Up to 8 calibrations may be programmed into the instrument. The STX features adjustable dam ..Readmore..
 
 
WTM 502 - Wire Tension Meter Overview
The WTM 502 tension meter quickly measures tension in cable guardrails, guy lines and overhead wires. It installs, measures and removes
in seconds. The digital load cell is highly accurate and requires no lookup or correction tables. The operator can quickly select from
15 different wire sizes and types stored in memory. The quick tension mode graphically displays the current and target te ..Readmore..
 
 
LTL 720 - Tension Link Load Cell Overview
The LTL 720 is a working tool that offers so much versatility, but is easy to use. Standard functions include On-Off, Zero, Peak Hold
and two user programmable set points. Power is provided from two internal "C" size batteries, for up to 500 hours of use. Designed for
indoor and outdoor industrial use, the LTL 720 will perform under virtually all environmental conditions (please consult fo ..Readmore..
 
 
RON 2000 - Tension Load Meter Overview
The RON 2000 series load meter is a lightweight portable force meter. The basic system consists of a 3 1/2 digit display, 20% full
scale tare range and shunt calibration. The load cell is made of high strength, coated alloy or stainless steel and designed with a
safety factor of 5 to 1. The load cells are lightweight relative to their capacity. The indicator is a self-contained unit with a ..Readmore..
 
 
RON 2150 - Tension Load Meter Overview
The RON 2150, removable large-scale display provides the versatility of both a dynamometer and a crane scale in one system. The large
readout may be hand-held at a remote location, or the readout may be attached directly to the load cell. This unique system offers
features such as: optional selectable units of measure, zero, tare, peak hold, optional two set points, overload indication, sl ..Readmore..
 
 
RON 2501 - Wireless Crane Scale Overview
The RON 2501 is a wireless crane scale that uses P.M. radio transmission from the load cell to the hand held receivers. The radio
transmission has error detection for high reliability telemetry, and a range of no less than 60 yards. The RON 2501 offers RS232 and 2
adjustable set points as options. Units are available in the following measurement readings: metric tons, short tons, k.newtons ..Readmore..
 
 
Copyright © 2007. Calibration Laboratory Co.,Ltd. All rights reserved.
Visitor : 1277312