ASIMATO – SERIES 210 GRIP THREE POINT INTERNAL MICROMETERS

FEATURES

Resolution: 000005″ / 0.001mm
Build in wireless data transmission
Tolerance preset and GO/NG judement
Measuring contact points are designed to allow measurements near the bottom of blind holes.
Carbide measuring surface (12mm above)
Additional extensions can be added to increase the measuring depth
330 rotatable display device, able to read measurement result in different angle
Setting rings for origin point setting

Range	Accuracy	Rod Length	Extension Rod	Code No.
6-8mm	0.004mm	55mm	100mm	210-11-0
8-10mm	0.004mm	55mm	100mm	210-12-0
10-12mm	0.004mm	55mm	100mm	210-13-0
12-16mm	0.004mm	80mm	150mm	210-24-0
16-20mm	0.004mm	80mm	150mm	210-25-0
20-25mm	0.004mm	90mm	150mm	210-26-0
25-30mm	0.004mm	90mm	150mm	210-27-0
30-40mm	0.004mm	105mm	150mm	210-28-0
40-50mm	0.004mm	105mm	150mm	210-29-0
50-63mm	0.005mm	127mm	150mm	210-30-0
62-75mm	0.005mm	127mm	150mm	210-31-0
75-88mm	0.005mm	127mm	150mm	210-32-0
87-100mm	0.005mm	127mm	150mm	210-33-0

ASIMETO DIGITAL CALIPERS (FOUR BUTTONS)

Features

Resolution： .0005″ / 0.01mm
Extra large LCD readout
The origin position is retained through the On/Off cycle
Inch/Metric conversion

Code No.	Range Inch	Accuracy Inch	Range Metric	Accuracy Metric
307-06-5	0-6″	+/- 0.001″	0-150mm	+/- 0.02mm
307-08-5	0-8″	+/- 0.0015″	0-200mm	+/- 0.03mm
307-12-5	0-12″	+/- 0.0015″	0-300mm	+/- 0.03mm

Dimension

ASIMETO IP67 BIG SCREEN DIGITAL CALIPER

Features

Resolution: .0005” / 0.01mm
Large screen: (53.5 x 15.5mm) LCD display area
Auto power off, extend battery life
Inch / Metric conversion
Memory function: Keep the reading even after the display is turned off
Conforms to the IP67 ratings

Code No.	Range Inch	Accuracy Inch	Range Metric	Accuracy Metric
305-06-5	0-6″	+/- 0.001″	0-150mm	+/- 0.02mm
305-08-5	0-8″	+/- 0.0015″	0-200mm	+/- 0.03mm
305-12-5	0-12″	+/- 0.0015″	0-300mm	+/- 0.03mm

ASIMETO – SERIES 205 DIGITAL DEPTH MICROMETERS

FEATURES

Resolution: .00005″ / 0.001mm
Micrometers Head Accuracy: (0-25mm / 0-1″)
Metrio: ± 0.002mm
Inch: ± 0.0001″
Measuring inserts Accuracy:
Metric: ± (2 + L / 75) µm
Inch: ± [0.001 + 0.0005 (L / 3)]”
L = Maximun measuring length (mm) (inch)
Protection level IP65
The integrity of the measurements are maintained throughout the total range of the measuring rods. However the measuring rods must be kept as a set and may not be interchangeable with other depth micrometers sets.
Both flat and spherical depth rod sets are available.
The measurement mode of absolute or incremental is displayed when turned on
The battery life is maximized with the automatic On/Off feature
Inch/Metric conversion
Support Bluetooth data transmission
Bluetooth data output: 901-01-5

Range	Base Length	Rods	Notes	Code No.
0-50mm / 0-2″	63mm	2 pcs	Flat End	205-02-0
0-100mm / 0-4″	63mm	4 pcs	Flat End	205-04-0
0-150mm / 0-6″	63mm	6 pcs	Flat End	205-06-0
0-300mm / 0-12″	63mm	12 pcs	Flat End	205-12-0
0-100mm / 0-4″	101.5mm	4 pcs	Flat End	205-04-2
0-150mm / 0-6″	101.5mm	6 pcs	Flat End	205-06-2
0-300mm / 0-12″	101.5mm	12 pcs	Flat End	205-12-2
0-50mm / 0-2″	63mm	2 pcs	Spherical End	205-52-0
0-100mm /0-4″	63mm	4 pcs	Spherical End	205-54-0
0-150mm / 0-6″	63mm	6 pcs	Spherical End	205-56-0
0-300mm / 0-12″	63mm	12 pcs	Spherical End	205-62-0
0-100mm / 0-4″	101.5mm	4 pcs	Spherical End	205-54-2
0-150mm / 0-6″	101.5mm	6 pcs	Spherical End	205-56-2
0-300mm / 0-12″	101.5mm	12 pcs	Spherical End	205-62-2

ASIMETO – SERIER 121 MULTI – ANVIL MICROMETERS

FEATURES

Graduation: .001″ / 0.01mm
Ratchet thimble
Measures tube thickness, shoulder edge distance rivet head height, with interchangeable anvils (Flat Anvil, Rod Anvil, V-anvil)
Carbide tipped measuring faces
Chrome-plated steel feet frame

Inch			Dimensions
Code No.	Range	Accuracy	A	d
121-01-1	0-1″	±.0001″	28.5mm	Ø3mm
121-02-1	1-2″	±.0002″	53.5mm	Ø5mm

Metric			Dimensions
Code No.	Range	Accuracy	A	d
121-01-0	0-25mm	0.004mm	28.5mm	Ø3mm
121-02-0	25-50mm	0.004mm	53.5mm	Ø5mm

ASIMETO – SERIER 125 MULTI – ANVIL MICROMETERS

FEATURES

Resolution:
Digital reading: .00005″ / 0.001mm
Ratchet stop
Measures tube thickness, shoulder edge distance rivet head height, with interchangeable anvils (Flat Anvil, Rod Anvil, V-anvil)
Inch/Metric conversion
Upon switching on the display will read the actual absolute measuring position
Carbide tipped measuring faces
Automatic On/Off to maximize battery life
Chrome-plated steel feet frame
Absolute or incremental measuring modes
Support Bluetooth data transmission Bluetooth data output: 901-01-5
Protection level IP65

Inch			Dimensions
Code No.	Range	Accuracy	A	d
125-01-1	0-1″	±.0001″	28.5mm	Ø3mm
125-02-1	1-2″	±.0002″	53.5mm	Ø5mm

Metric			Dimensions
Code No.	Range	Accuracy	A	d
125-01-0	0-25mm	±0.002mm	28.5mm	Ø3mm
125-02-0	25-50mm	±0.002mm	53.5mm	Ø5mm

ASIMETO – SERIES 102 QUICK – SETTING OUTSIDE MICROMETERS,1MM REV

FEATURES

Graduation: 0.01mm
Flatness: 0.3μm
Ratchet thimble
1mm thread pitch for quick setting
The measurement can be read directly from the thimble due to the 100 step graduation
Carbide tipped measuring faces
Grey painted steel frame

Metric			Dimensions
Code No.	Range	Accuracy	A	B	L
102-61-0	0-25mm	0.004mm	6mm	24mm	32mm
102-62-0	25-50mm	0.004mm	8mm	32mm	57mm
102-63-0	50-75mm	0.005mm	8mm	45mm	82mm
102-64-0	75-100mm	0.005mm	8mm	57mm	107mm

ASIMETO – SERIES 112 BLADE MICROMETERE

FEATURES

Graduation: .001″ / 0.01mm
Ratchet stop
For measuring the groove diameter of shafts, keyways, and other hard to reach portions
Non-rotating spindle
Carbide tipped measuring faces
Grey painted steel frame

Anvil Type A	Anvil Type B	Inch	Dimensions
Code No.	Code No.	Range	Accuracy	a	C
112-01-1	112-01-3	0-1″	±.0001″	57 mm	32 mm
112-02-1	112-02-3	1-2″	±.0002″	82 mm	44.5 mm
112-03-1	112-03-3	2-3″	±.0002″	107 mm	57 mm
112-04-1	112-04-3	3-4″	±.0002″	132.6 mm	69.5 mm
112-05-1	112-05-3	4-5″	±.0002″	158 mm	82 mm
112-06-1	112-06-3	5-6″	±.0002″	183.4 mm	94.5 mm

Anvil Type A	Anvil Type B	Metric	Dimensions
Code No.	Code No.	Range	Accuracy	a	C
112-01-0	112-01-2	0-25mm	0.004mm	57 mm	32 mm
112-02-0	112-02-2	25-50mm	0.004mm	82 mm	44.5 mm
112-03-0	112-03-2	50-75mm	0.005mm	107 mm	57 mm
112-04-0	112-04-2	75-100mm	0.005mm	132.6 mm	69.5 mm
112-05-0	112-05-2	100-125mm	0.006mm	158 mm	82 mm
112-06-0	112-06-2	125-150mm	0.006mm	183.4 mm	94.5 mm

ASIMETO – SERIES 131 SINGLE POINT MICROMETERS

FEATURES

Graduation: 0001″ / 0.01mm
Ratchet stop
For measuring the height of crimp contacts
Carbide tipped measuring faces
Grey painted steel frame

Anvil Type B	Anvil Type C	Anvil Type E	Inch		Dimensions
Code No.	Code No.	Code No.	Range	Accuracy	A	C
131-01-1	131-01-3	131-01-5	0-1″	±.0001″	34.4mm	24mm
131-02-1	–	–	1-2″	±.0002″	59.4mm	32mm
131-03-1	–	–	2-3″	±.0002″	84.8mm	44.5mm
131-04-1	–	–	3-4″	±.0002″	110.2mm	57mm

Anvil Type B	Anvil Type C	Anvil Type E	Metric		Dimensions
Code No.	Code No.	Code No.	Range	Accuracy	A	C
131-01-0	131-01-2	131-01-4	O-25mm	0.004mm	34.4mm	24mm
131-02-0	–	–	25-50mm	0.004mm	59.4mm	32mm
131-03-0	–	–	5O-75mm	0.005mm	84.8mm	44.5mm
131-04-0	–	–	75-1OOmm	0.005mm	110.2mm	57mm

ASIMETO – SERIES 135 SINGLE POINT MICROMETERS

FEATURES

Resolution : Digital reading: .00005″ / 0.001mm
Ratchet stop
For measuring the height of crimp contacts
Carbide tipped measuring faces
Grey painted steel frame
Inch/Metric conversion
Upon switching on the display will read the actual absolute measuring position
Automatic On/Off to maximize battery life
Absolute or incremental measuring modes
Support Bluetooth data transmission Bluetooth data output: 901-01-5
Protection level IP65

Anvil Type B	Anvil Type C	Anvil Type E	Inch		Dimensions
Code No.	Code No.	Code No.	Range	Accuracy	A	C
135-01-1	135-01-3	135-01-5	0-1″	±.0001″	34.4mm	24mm
135-02-1	–	–	1-2″	±.0002″	59.4mm	32mm
135-03-1	–	–	2-3″	±.0002″	84.8mm	44.5mm
135-04-1	–	–	3-4″	±.0002″	110.2mm	57mm

Anvil Type B	Anvil Type C	Anvil Type E	Metric		Dimensions
Code No.	Code No.	Code No.	Range	Accuracy	A	C
135-01-0	135-01-2	135-01-4	O-25mm	±0.002mm	34.4mm	24mm
135-02-0	–	–	25-50mm	±0.002mm	59.4mm	32mm
135-03-0	–	–	5O-75mm	±0.003mm	84.8mm	44.5mm
135-04-0	–	–	75-100mm	±0.003mm	110.2mm	57mm

ASIMETO – SERIES 152 DIAL SNAP GAUGES

FEATURES

Carbide tipped measuring faces, spindle diameter 010
Dial indication graduation:.00005″ / 0.001mm
Dial range: +.0015″ / +0.04mm
Direct GO/NG judgment
Big size indicator, easy to be read
Measuring force 5-10N
Protection level IP54

ASIMETO – SERIES 156 DIGITAL DISC BRAKE MICROMETERS

FEATURES

Resolution: ,00005″ / 0.001mm
Protection level IP65
For measuring the grooves depth on the brake disc system.
Carbide measuring face with 609 point
Support Bluetooth data transmission
Data Output : Bluetooth data output: 901-01-5

Range	Accuracy	Code No.
7.6-33mm	± 0.002mm	156-01-6
25-50mm	± 0.002mm	156-02-6

ASIMETO – SERIES 190 CALIPER MICROMETERS

FEATURES

Graduation :
Inch: .001″
Metric: 0.01mm
Carbide tipped measuring faces
Ratchet Stop

Range	Accuracy	L	Code No.
0 – 25mm	0.004mm	56mm	190-10-1
25 – 50mm	0.004mm	81mm	190-11-0
50 – 75mm	0.005mm	106mm	190-12-0
75 – 100mm	0.005mm	131mm	190-13-0

ASIMETO – SERIES 208 THREE – POINT DIGITAL INTERNAL MICROMETERS

FEATURES

Resolution:
Digital models: .00005″ / 0.001mm
Mechanical models: .0002″ / 0.005mm
Digital models: Protection level IP65
Measuring contact points are designed to allow measurements near to the bottom of blind holes
Additional extensions can be added to increase the measuring depth
Measuring surfaces are carbide
Setting ring are not included with the set but are optional
Digital models support Bluetooth data transmission
Bluetooth data output: 901-01-5

Inch				Dimensions
Code No.	Range	Accuracy	Setting Ring	L	A	Extension Rod
208-24-1	.5-.65″	±.0001″	.65″	80mm	0.5mm	150mm
208-25-1	.65-.8″	±.0001″	.65″	80mm	0.5mm	150mm
208-26-1	.8-1″	±.0001″	1″	90mm	0.5mm	150mm
208-27-1	1-1.2″	±.0002″	1″	90mm	0.5mm	150mm
208-28-1	1.2-1.6″	±.0002″	1.6″	97mm	0.5mm	150mm
208-29-1	1.6-2″	±.0002″	1.6″	97mm	0.5mm	150mm
208-30-1	2-2.5″	±.0002″	2.5″	114mm	0.5mm	150mm
208-31-1	2.5-3″	±.0002″	2.5″	114mm	0.5mm	150mm
208-32-1	3-3.5″	±.0002″	3.5″	114mm	0.5mm	150mm
208-33-1	3.5-4″	±.0002″	3.5″	114mm	0.5mm	150mm

ASIMETO – SERIES 303 DIAL CALIPERS

Features

Graduation: 0.02 mm
TStainless steel construction with all hardened measuring surfaces
Preloaded dual pinions eliminate backlash and provides better repeatability
Thumb roller included

Code No.	Range	Accuracy	Graduation
303-06-2	0-150mm	+/- 0.03mm	0.02mm
303-08-2	0-200mm	+/- 0.03mm	0.02mm
303-12-2	0-300mm	+/- 0.04mm	0.02mm

Dimension

ASIMETO – SERIES 307 DIGITAL CALIPERS (THREE BUTTONS)

Features

Resolution： .0005″ / 0.01mm
Extra large LCD readout
The origin position is retained through the On/Off cycle
Inch/Metric conversion

Code No.	Range Inch	Accuracy Inch	Range Metric	Accuracy Metric
307-06-5	0-6″	+/- 0.001″	0-150mm	+/- 0.02mm
307-08-5	0-8″	+/- 0.0015″	0-200mm	+/- 0.03mm
307-12-5	0-12″	+/- 0.0015″	0-300mm	+/- 0.03mm

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Cookie	Duration	Description
__utma	2 years	Used to distinguish users and sessions. The cookie is created when the javascript library executes and no existing __utma cookies exists. The cookie is updated every time data is sent to Google Analytics.
__utmb	30 mins	Used to determine new sessions/visits. The cookie is created when the javascript library executes and no existing __utmb cookies exists. The cookie is updated every time data is sent to Google Analytics.
__utmc	End of browser session	Using by Google Analytics. Not used in ga.js. Set for interoperability with urchin.js. Historically, this cookie operated in conjunction with the __utmb cookie to determine whether the user was in a new session/visit.
__utmv	2 years	Used to store visitor-level custom variable data. This cookie is created when a developer uses the _setCustomVar method with a visitor level custom variable. This cookie was also used for the deprecated _setVar method. The cookie is updated every time data is sent to Google Analytics.
__utmz	6 months	Stores the traffic source or campaign that explains how the user reached your site. The cookie is created when the javascript library executes and is updated every time data is sent to Google Analytics.
message	-	This cookie is used to identify a website visitor that logged in or not. It contains a token that is used to know the website visitor status.