ASIMETO SERIES-117 DIGITAL BLADE MICROMETERS

Features

  • Resolution: .00005″ / 0.001mm
  • Ratchet stop
  • For measuring the groove diameter of shafts, keyways, and other hard to reach portion
  • Non-rotating spindle
  • Carbide tipped measuring faces
  • Inch/Metric conversion
  • Read the actual absolute measuring position upon switching on the display
  • Automatic On/Off to maximize battery life
  • Absolute or incremental measuring modes
Code No. Range Accuracy Anvil Type
117-01-0 0-25 mm / 0-1″ ±0.002 mm A
117-02-0 25-50mm / 1-2″ ±0.002 mm A
117-03-0 50-75mm / 2-3″ ±0.003 mm A
117-04-0 75-100mm / 3-4″ ±0.003 mm A
117-05-0 100-125mm / 4-5″ ±0.003 mm A
117-06-0 125-150mm / 5-6″ ±0.003 mm A
117-01-2 0-25 mm / 0-1″ ±0.002 mm B
117-02-2 25-50mm / 1-2″ ±0.002 mm B
117-03-2 50-75mm / 2-3″ ±0.003 mm B
117-04-2 75-100mm / 3-4″ ±0.003 mm B
117-05-2 100-125mm / 4-5″ ±0.003 mm B

ASIMETO SERIES-126 POINT MICROMETERS

Features

  • Resolution: Digital reading: .00005″ / 0.001mm Scale on digital models: .0001″ / 0.01mm
  • 15 degree and 30 degree measuring points are avaiable
  • For measuring the web thickness of drills, small groove, and other hard to reach dimensions
  • Carbide tipped measuring faces
  • Ratchet stop
  • Inch/Metric conversion
  • Read the actual absolute measuring position upon switching on the display
  • Automatic On/Off to maximize battery life
  • Absolute or incremental measuring modes
  • Protection level IP65 
Code No. Range Accuracy Anvil Type
126-01-0 0-25 mm / 0-1″ ±0.002 mm 15°
126-02-0 25-50 mm / 1-2″ ±0.002 mm 15°
126-03-0 50-75 mm / 2-3″ ±0.003 mm 15°
126-04-0 75-100 mm / 3-4″ ±0.003 mm 15°
126-01-2 0-25 mm / 0-1″ ±0.002 mm 30°
126-02-2 25-50 mm / 1-2 ±0.002 mm 30°
126-03-2 50-75 mm / 2-3″ ±0.003 mm 30°
126-04-2 75-100 mm / 3-4″ ±0.003 mm 30°

ASIMETO SERIES-147 DIGITAL TUBE MICROMETERS

Features

  • Resolution: .00005″ / 0.001mm
  • Protection level IP65
  • For measuring wall thickness of various tubes
  • Carbide tipped measuring faces
  • Ratchet stop
  • Anvils J and Anvils K are optional
  • Inch/Metric conversion
  • Read the actual absolute measuring position upon switching on the display
  • Automatic On/Off to maximize battery life
  • Absolute or incremental measuring modes
  • Grey painted steel frame
Code No. Range Accuracy Anvil Type
147-01-0 0-25mm/0-1″ ±0.002 mm J
147-02-0 25-50mm/1-2″ ±0.002 mm J
147-03-0 50-75mm/2-3″ ±0.003 mm J
147-04-0 75-100mm/3-4″ ±0.003 mm J
147-01-2 0-25mm/0-1″ ±0.002 mm K
147-02-2 25-50mm/1-2″ ±0.002 mm K
147-03-2 50-75mm/2-3″ ±0.003 mm K
147-04-2 75-100mm/3-4″ ±0.003 mm K

ASIMETO SERIES-147 LONG JAW VERNIES CALIPERS (MONO BLOCK)

Features

  • Graduation : Inch: .001″ Metric: 0.02mm or 0.05 mm
  • Stainless steel
  • Models available with an assortment of Metric/Inch  scale configurations
  • Designed with fine adjustment to allow precise movement of the slider
  • Internal measurement jaws are rounded to provide accurate measurement of internal diameters

MONO BLOCK MODELS

Dimensions
Code No. Lower Range Upper Range Lower Graduation Upper Graduation Accuracy L A D E F
311-12-3 0-12″ 0-300m .001″ 0.002mm ±.0015″ 450mm 90mm 20mm 5mm 12mm
311-20-3 0-20″ 0-500mm .001″ 0.002mm ±.0020″ 735mm 200mm 31mm 10mm 24mm
311-30-3 0-30″ 0-750mm .001″ 0.002mm ±.0020″ 985mm 200mm 31mm 10mm 2400
311-40-3 0-40″ 0-1000mm  .001″ 0.002mm ±.0030″ 1235mm 200mm 31mm 10mm 24mm
311-12-4 0-300mm 0-12″ 0.02mm .001″ ±0.04mm 450mm 90mm 20mm 5mm 12mm
311-20-4 0-500mm 0-20″ 0.02mm .001″ ±0.05mm 735mm 200mm 31mm 10mm 24mm
311-30-4 0-750mm 0-30″ 0.02mm .001″ ±0.07mm 985mm 200mm 31mm 10mm 24mm
311-40-4 0-1000mm 0-40″ 0.02mm .001″ ±0.07mm 1235mm 200mm 31mm 10mm 24mm
311-12-6 0-300mm 0-12″ 0.05mm 1/128″ ±0.05mm 450mm 90mm 20mm 5mm 12mm
311-20-6 0-500mm 0-20″ 0.05mm 1/128″ ±0.08mm 735mm 200mm 31mm 10mm 24mm
311-30-6 0-750mm 0-30″ 0.05mm 1/128″ ±0.10mm 985mm 200mm 31mm 10mm 24mm
311-40-6 0-1000mm 0-40″ 0.05mm 1/128″ ±0.10mm 1235mm 200mm 31mm 10mm 24mm

 

ASIMETO SERIES-155 DIGITAL V-ANVIL MICROMETERS

FEATURES

  • Resolution: .00005″ / 0.001mm
  • Protection level IP65
  • For measuring the outside diameter of cutting tools such as taps, reamers and end mills
  • Carbide tipped measuring faces
  • Inch/Metric conversion
  • Read the actual absolute measuring position upon switching on the display
  • Automatic On/Off to maximize battery life
  • Absolute or incremental measuring modes
  • Support Bluetooth data transmission Bluetooth data output: 901-01-5
Range Accuracy Notes Code No.
1-15mm / .04-.6″ ± 0.002mm 3 Flutes 155-01-0
5-20mm / .2-.8″ ± 0.002mm 3 Flutes 155-02-0
20-35mm / .8-1.4″ ± 0.003mm 3 Flutes 155-03-0
35-50mm / 1.4-2.0″ ± 0.003mm 3 Flutes 155-04-0
50-65mm / 2.0-2.6″ ± 0.003mm 3 Flutes 155-05-0
65-80mm / 2.6-3.2″ ± 0.003mm 3 Flutes 155-06-0
80-95mm / 3.2-3.3.8″ ± 0.003mm 3 Flutes 155-07-0
2.3-25mm / .09-1.0″ ± 0.002mm 3 Flutes 155-01-2
25-50mm / 1.0-2.0″ ± 0.002mm 3 Flutes 155-02-2
5-25mm / .2-1.0″ ± 0.002mm 5 Flutes 155-01-4
25-45mm / 1.0-1.8′ ± 0.002mm 5 Flutes 155-02-4
45-65mm / 1.8-2.6″  ± 0.003mm 5 Flutes 155-03-4
65-85mm / .6-3.4″ ± 0.003mm 5 Flutes 155-04-4
85-105mm / 3.4-4.2″ ± 0.003mm 5 Flutes 155-05-4

ASIMETO SERIES-203 lNSIDE MICROMETERS

Features

  • Resolution：.001″ / 0.01mm
  • Designed for the measurement of intricate internal characteristics
  • Satin chrome finished
  • .2-1.2″ / 5-30mm and 1-2″ / 25-50mm range are supplied with Setting Ring
  • Ratchet stop

 

Code No. Range Accuracy Thimble
105-01-4 0-25 mm / 0-1″ ±0.002 mm Dual Ratchets
105-02-4 25-50 mm / 1-2″ ±0.002 mm Dual Ratchets
105-03-4 50-75 mm / 2-3″ ±0.003 mm Dual Ratchets
105-04-4 75-100 mm / 3-4″ ±0.003 mm Dual Ratchets
105-05-4 100-125 mm / 4-5″ ±0.003 mm Dual Ratchets
105-06-4 125-150 mm / 5-6″ ±0.003 mm Dual Ratchets

ASIMETO SERIES-207 DIGITAL INSIDE MICROMETERS

Features

  • Resolution: .00005″ / 0.001mm
  • Designed for the measurement of intricate internal characteristics
  • Solid carbide pins for measurement contact points
  • .2-1.2″ / 5-30mm and 1-2″ / 25-50mm range are supplied with setting ring
  • Ratchet stop
Code No. Range Accuracy
207-01-0 5-30mm / .2-1.2″ ±0.003 mm
207-02-0 25-50mm / 1-2″ ±0.003 mm
207-03-0 50-75mm / 2-3″ ±0.004 mm
207-04-0 75-100mm / 3-4″ ±0.004 mm
207-05-0 100-125mm / 4-5″ ±0.005 mm
207-06-0 125-150mm / 5-6″ ±0.005 mm
207-07-0 150-175mm / 6-7″ ±0.005 mm
207-08-0 175-200mm / 7-8″ ±0.005 mm

ASIMETO-SERIES 201 DEPTH MICROMETERS

FEATURES

  • Resolution: .001″ / 0.01mm
  • Micrometers Head accuracy: (0-25mm / 0-1″)
    Metrio: 0.004mm
    Inch: ± .0001″
  • Measuring inserts accuracy:
    Metric: ± (2 + L / 75) um
    Inch: ± [0.001 + 0.0005 (L / 3)]”
    L = Maximun measuring length (mm) (inch)
  • The integrity of the measurements are maintained throughout the total range of the measuring rods. However the measuring rods must be kept as a set and may not be interchangeable with other depth micrometers sets
  • Both flat and spherical depth rod sets are available
Range Base Length Rods Anvil Type Notes Code No.
0-2″ 63mm 2 pcs Flat End Run Through 201-02-0
0-4″ 63mm 4 pcs Flat End Run Through 201-04-0
0-6″ 63mm 6 pcs Flat End Run Through 201-06-0
0-12″ 63mm 12 pcs Flat End Run Through 201-12-0
0-4″ 101.5mm 4 pcs Flat End Run Through 201-04-2
0-6″ 101.5mm 6 pcs Flat End Run Through 201-06-2
0-12″ 101.5mm 12 pcs Flat End Run Through 201-12-2
0-2″ 63mm 2 pcs Spherical End Run Through 201-52-0
0-4″ 63mm 4 pcs Spherical End Run Through 201-54-0
0-6″ 63mm 6 pcs Spherical End Run Through 201-56-0
0-12″ 63mm 12 pcs Spherical End Run Through 201-62-0
0-4″ 101.5mm 4 pcs Spherical End Run Through 201-54-2
0-6″ 101.5mm 6 pcs Spherical End Run Through 201-56-2
0-12″ 101.5mm 12 pcs Spherical End Run Through 201-62-2
0-4″ 57mm 4 pcs Flat End Half-base 201-04-7
0-6″ 57mm 6 pcs Flat End Half-base 201-06-7

ASIMETO-SERIES 242 INSIDE MICROMETERS – INTERCHANGEABLE ROD TYPE

FEATURES

  • Graduation: .001″ / 0.01mm.
  • Accuracy:
    Metric (6 + L / 50) mm
    Inch [0.0003 + 0.00005 (L / 2)]”
    L = Maximun measuring length (mm) / inch
  • Rods marked with its measuring range
  • Satin chrome finish throughout
  • All contact points hardened for extra long tool life
  • With locking clamp
  • Zero point can be readjusted by rotating the micrometer head sleeve
  • Carbide tipped measuring faces

 

Range Head Travel Graduation Note Code No.
25-50mm 7.0mm 0.01mm 25mm Mic head & 2 Rods 242-02-0
50-2000mm 13mm 0.01mm 50mm Mic head & 6 Rods 242-08-0
50-300mm 13mm 0.01mm 50mm Mic head & 10 Rods 242-12-0
200-500mm 25mm 0.01mm 200mm Mic head & 3 Rods 242-20-0
200-1000mm    25mm 0.01mm 200mm Mic head & 8 Rods 242-40-0

ASIMETO-SERIES 318 MULTI-FUNCTION DIGITAL CALIPERS

FEATURES

  • Resolution: .0005″ / 0.01mm
  • ABS system delivery reliable measurement with preset value function, the initial value can be set arbitrarily
  • Zero-setting at any position for incremental measurement
  • Inch/Metric conversion
  • With three shape probes
  • Data Output : Cable data output: 900-05-4/5
    Wireless data output: Transmitter 901-00-4/6 / Receiver 901-00-3
    Bluetooth data output: 901-01-2/4
Range Accuracy Code No.
0-150mm / 0-6″ ± 0.03mm 318-06-3
0-200mm / 0-8″ ± 0.03mm 318-08-3
0-300mm / 0-12″ ± 0.04mm 318-12-3

ASIMETO-SERIES 325-30 DIGITAL THICKNESS GAUGES

FEATURES

  • Resolution: .0005″ / 0.01mm
  • Inch/Metric conversion
  • For measuring the thickness of paper, film, wire, sheet metal, jewelry, leather and similar materials.
  • Light weight, easy to operate.
Range Resolution Accuracy Code No.
0-12mm / 0-.5″ 0.01mm ± 0.03mm 325-30-0

ASIMETO-SERIES 325-32 DIGITAL THICKNESS GAUGES

FEATURES

  • Resolution: .0005″ / 0.01mm
  • Inch/Metric conversion
  • For measuring the thickness of paper, film, wire, sheet metal, jewelry, leather and similar materials.
  • Light weight, easy to operate.
Range Resolution Accuracy Code No.
0-25mm / 0-1″ 0.01mm ± 0.04mm 325-32-0

ASIMETO-SERIES 483 / 484 DIGITAL BORE GAUGES

FEATURES

  • Moveable probe pin with carbide ball
  • .24-.4″ / 6-10mm: with fixed anvils
    .4-.74″ / 10-18m: with plate guide and fixed anvils
    .7-1.4″ / 18-35mm: with canister and fixed anvils
    Over 1.4″ / 35mm: with wheel guide and inserting anvils
Range Graduation Individual Size Indicator Code No.
18-160mm 0.01mm 18-35mm
35-50mm
50-160mm		 402-03-2
3mmx0.01mm		 484-63-8
18-160mm 0.001mm 18-35mm
35-50mm
50-160mm		 402-01-2 
1mmx0.001mm		 483-63-8

ASIMETO-SERIES 485 / 486 DIGITAL BORE GAUGES

FEATURES

  • Resolution: .00005″ / 0.002mm / 0.001mm
  • Dynamic carbide contact point
  • Digital gauges has analog sweep display to determine minimum reading
  • .24-.4″/6-10mm range: with fixed anvils
    .4-.74″/10-18mm range: with plate guide and fixed anvils
    .7-1.4″/18-35mm range: with canister and fixed anvils
    Over 1.4″/35mm range: with wheel guide and inserting anvils
Range Accuracy Probe Depth Code No.
6-10mm / .24″-.4″ ±0.012mm 1.5″/40mm 485-11-0
10-18mm / .4-.7″ ±0.012mm 4″/100mm 485-12-0
18-35mm / .7-1.5″ ±0.015mm 6″/150mm 485-21-0
35-50mm / 1.4-2.4″ ±0.015mm 6″/150mm 485-22-0
50-160mm / 2-6″ ±0.018mm 6″/150mm 485-31-0
160-250mm / 6-10″ ±0.018mm 16″/400mm 485-32-0
250-400mm / 10-16″ ±0.018mm 16″/400mm 485-33-0
6-10mm / .24″-.4″ ±0.005mm 1.5″/40mm 486-11-0
10-18mm / .4-.7″ ±0.005mm 4″/100mm 486-12-0
18-35mm / .7-1.5″ ±0.007mm 4″/100mm 486-21-0
35-50mm / 1.4-2.4″ ±0.007mm 6″/150mm 486-22-0
50-160mm / 2-6″ ±0.007mm 6″/150mm 486-31-0
160-250mm / 6-10″ ±0.007mm 16″/400mm 486-32-0
250-400mm / 10-16″ ±0.007mm 16″/400mm 486-33-0

ASIMETO-SERIES 491 DIAL THICKNESS GAUGES

FEATURES

  • Resolution: .001″ / 0.01mm
  • Designed for the measurement of paper, film, wire,
  • sheet metal, jewelry, leather and similar materials.
  • Flat measurement anvils
Range Resolution Accuracy Code No.
0-10mm 0.01mm ± 0.015mm 491-01-0
0-10mm 0.01mm ± 0.015mm 491-02-0

ASIMETO-SERIES 640 DIGITAL SHORE DUROMETER HARDNESS TESTER

FEATURES

  • Resolution: 0.1H
  • 128 x 64 LDC display
  • Measurement mode: Averaging mode, Max mode, Timer mode
  • Tolerance warning alarm
  • Data storage, printing, uploading
  • USB data output
  • Wireless printing capability
  • Shore A application range: soft vulcanized rubber, natural rubber, nitriles thermoplastic elastomers, flexible polyacrylics and thermosets, wax, felt, leathers, etc.
  • Shore D application range: hard rubber, thermoplastic elastomers, harder plastics, thermoplastics, etc.
Range Type Resolution Accuracy Code No.
0-100HA Shore A 0.1HA ±0.1HA 640-06-5
0-100HD Shore D 0.1HD ±0.1HD 640-06-6
Exit mobile version