ร้านค้า - Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments. https://www.cal-laboratory.com/en/shop/ Tue, 30 Dec 2025 08:39:16 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.1 https://www.cal-laboratory.com/wp-content/uploads/2021/04/cropped-logobak-32x32.png ร้านค้า - Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments. https://www.cal-laboratory.com/en/shop/ 32 32 MAHR MARCAL 30 EWRI / 30 EWR DIGITAL DEPTH GAGE https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mahr-marcal-30-ewri-30-ewr-digital-depth-gage-2/ Tue, 30 Dec 2025 08:38:50 +0000 https://www.cal-laboratory.com/?post_type=product&p=20544 Digital depth gage MarCal 30 EWRi
Measuring range mm: 0 - 150 mm
Resolution mm/inch: 0.01 mm / 0.0005 inch
Data interface: Integrated Wireless
IP protection category: IP 67
Package contains: battery, test certificate, instruction manual, case

The post MAHR MARCAL 30 EWRI / 30 EWR DIGITAL DEPTH GAGE appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> Product information

  • High contrast digit display
  • Locking screw above
  • Lapped guideway
  • Measuring surfaces made of steel
  • Slide and beam made of hardened stainless steel
  • Immediate measurements due to the Reference System
  • Raised guideway for the protection of the scale
  • Excellent resistance against dust, coolants and lubricants
  • Dirt wipers are integrated in the slide

Technical data

Measuring range mm 0 – 150
Measuring range 0 – 6″
Resolution mm/inch 0.01 / .0005″
Error limit (mm) 0.03 mm
Error limit inches .001″
Standard ISO 13385-2
Battery type CR 2032 (3V Lithium)
Dimensions a 230 mm | b 100 mm |

The post MAHR MARCAL 30 EWRI / 30 EWR DIGITAL DEPTH GAGE appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MAHR MARCATOR 1086 R-HR DIGITAL INDICATOR https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mahr-marcator-1086-r-hr-digital-indicator-2/ Tue, 30 Dec 2025 08:14:25 +0000 https://www.cal-laboratory.com/?post_type=product&p=20536 MAHR MARCATOR 1086 R-HR DIGITAL INDICATOR High contrast LCD display, thus very clear and safe to read Operating and display unit (bezel) can be rotated through 2809 Lifter protection cap on the measuring spindle Mounting shank and measuring spindle are both made of hardened stainless steel Immediate measurements due to the Reference System   Product…

The post MAHR MARCATOR 1086 R-HR DIGITAL INDICATOR appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MAHR MARCATOR 1086 R-HR DIGITAL INDICATOR

  • High contrast LCD display, thus very clear and safe to read
  • Operating and display unit (bezel) can be rotated through 2809
  • Lifter protection cap on the measuring spindle
  • Mounting shank and measuring spindle are both made of hardened stainless steel
  • Immediate measurements due to the Reference System

 

Product type 1086 R-HR
Measuring span in mm 12.5 mm
Measuring span (inches) .5″
Resolution 0.0001 mm , 0.0005 mm , 0.001 mm , 0.002 mm , 0.005 mm , 0.01 mm
Error limit (mm) 0.0018 mm
Repeatability mm 0.0018 mm
Measuring force (N) 0.65 – 0.9
Height of digits 11 mm
Battery type CR 2450N (3V Lithium)
Dimensions a 126.3 mm | b 23 mm | c 13.5 mm |

The post MAHR MARCATOR 1086 R-HR DIGITAL INDICATOR appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MAHR DIGIMAR 816 CL HEIGHT MEASURING INSTRUMENT https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mahr-digimar-816-cl-height-measuring-instrument-2/ Tue, 30 Dec 2025 08:09:47 +0000 https://www.cal-laboratory.com/?post_type=product&p=20535 Height measuring instrument Digimar 816 CL Measuring range mm: 0 – 350 mm 0.001 mm, 0.01 mm / 0.00005 inch, 0.0001 inch Error limit: (2.8+L/300) L in mm Data interface: Opto RS-232C, USB, wireless Package contains: height measuring instrument incl. operating and display unit, carrier 817h1, probe K6/51, setting block 817 eb, instruction manual, power…

The post MAHR DIGIMAR 816 CL HEIGHT MEASURING INSTRUMENT appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> Height measuring instrument Digimar 816 CL
Measuring range mm: 0 – 350 mm
0.001 mm, 0.01 mm / 0.00005 inch, 0.0001 inch
Error limit: (2.8+L/300) L in mm
Data interface: Opto RS-232C, USB, wireless
Package contains: height measuring instrument incl. operating and display unit, carrier 817h1, probe K6/51, setting block 817 eb, instruction manual, power source, protection cover, Calibration certificate

Technical data

Measuring range mm 0 – 350 mm
Measuring range 0 – 14″
Resolution 0.001 mm , 0.01 mm
Resolution 0.00005 inch , 0.0001 inch
Error limit (2.8+L/300) L in mm
Repeatability planes 2 µm
Repeatability bores 3 µm
Perpendicularity error in µm 15 µm
Data interface Opto RS-232C , USB , wireless
Product weight 25 kg

The post MAHR DIGIMAR 816 CL HEIGHT MEASURING INSTRUMENT appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MAHR MARCATOR 1087 RI DIGITAL INDICATOR https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mahr-marcator-1087-ri-digital-indicator-2/ Tue, 30 Dec 2025 07:51:39 +0000 https://www.cal-laboratory.com/?post_type=product&p=20529 Digital indicator MarCator 1087 Ri IP protection category: IP 42 Data interface: Integrated Wireless, USB, Digimatic, Opto RS-232C Factory standard Measuring span in mm: 12.5mm Resolution: 0.0005, 0.001, 0.002, 0.005, 0.01 Resolution inches: .00002″, .00005″, .0001″, .0002″, .0005″ Package contains: battery, test certificate, instruction manual, Cardboard box Product information Integrated wireless transmitter High-contrast LCD display…

The post MAHR MARCATOR 1087 RI DIGITAL INDICATOR appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> Digital indicator MarCator 1087 Ri
IP protection category: IP 42
Data interface: Integrated Wireless, USB, Digimatic, Opto RS-232C
Factory standard
Measuring span in mm: 12.5mm
Resolution: 0.0005, 0.001, 0.002, 0.005, 0.01
Resolution inches: .00002″, .00005″, .0001″, .0002″, .0005″
Package contains: battery, test certificate, instruction manual, Cardboard box

Product information

  • Integrated wireless transmitter
  • High-contrast LCD display
  • Operating and display unit can be rotated 280&deg
  • Lift-off cap on end of measuring pin
  • Mounting shaft and measuring pin in hardened stainless steel
  • Ready to measure immediately thanks to reference system

Technical data

Product type 1087 Ri
Measuring span in mm 12.5 mm
Measuring span (inches) .5″
Resolution 0.0005 mm , 0.001 mm , 0.002 mm , 0.005 mm , 0.01 mm
Graduation value mm 0,0005 , 0,001 , 0,002 , 0,005 , 0,01
Graduation value inches .000002” , .00005″ , .0001” , .0002” , .0005″
Error limit (mm) 0.004 mm
Repeatability mm 0.001 mm
Measuring force (N) 0.65 – 0.85
Height of digits 8.5 mm
Range of analog display mm ± 0,01 , ± 0,02 , ± 0,04 , ± 0,1 , ± 0,2
Range of analog display inches ± .0004″ , ± .001” , ± .002″ , ± .004″ , ± .01”
Battery type CR 2450N (3V Lithium)
Dimensions a 126.3 mm | b 23 mm | c 13.5 mm |

 

 

 

The post MAHR MARCATOR 1087 RI DIGITAL INDICATOR appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MAHR MICROMAR 45 T DEPTH MICROMETER https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mahr-micromar-45-t-depth-micrometer-2/ Tue, 30 Dec 2025 07:26:53 +0000 https://www.cal-laboratory.com/?post_type=product&p=20526 FEATURES • Operating and display units with satin chrome finish • Stainless spindle is hardened throughout and ground • Rapid drive with integrated ratchet • Package contains: extensions 25 mm and 50 mm, case TECHNICAL DATA Order no. Type Measuring range Readings Error limit Spindle thread pitch Standard mm mm µm mm 4180000 45 T…

The post MAHR MICROMAR 45 T DEPTH MICROMETER appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> FEATURES
• Operating and display units with satin chrome finish
• Stainless spindle is hardened throughout and ground
• Rapid drive with integrated ratchet
• Package contains: extensions 25 mm and 50 mm, case

TECHNICAL DATA

Order no. Type Measuring range Readings Error limit Spindle thread
pitch		 Standard
mm mm µm mm
4180000 45 T 0 – 100 0.01 5 0.5 Factory
standard

 

Order no. a b c
mm mm mm
4180000 100 16 13

The post MAHR MICROMAR 45 T DEPTH MICROMETER appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MITUTOYO SERIES 186 – RADIUS GAGES https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mitutoyo-series-radius-gages-series-186-2/ Mon, 29 Dec 2025 10:18:50 +0000 https://www.cal-laboratory.com/?post_type=product&p=20512 • Radius size is stamped on each gage leaf. • Each leaf comprises an internal and an external radius gage of the same size. • With locking clamp. SPECIFICATIONS Metric Code No. Range (mm) Accuracy Composition of leaves Remarks 186-110 0.4 – 6 ±0.04 mm 18 leaves: 0.4, 0.8, 1, 1.2, 1.5, 1.6 mm, 1.75…

The post MITUTOYO SERIES 186 – RADIUS GAGES appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> • Radius size is stamped on each gage leaf.
• Each leaf comprises an internal and an
external radius gage of the same size.
• With locking clamp.

SPECIFICATIONS

Metric
Code No. Range (mm) Accuracy Composition of leaves Remarks
186-110 0.4 – 6 ±0.04 mm 18 leaves: 0.4, 0.8, 1, 1.2, 1.5, 1.6 mm, 1.75 – 3 mm by 0.25 mm, 3.5 – 6 mm by 0.5 mm 90° arc
186-902 0.5 – 13 26 leaves: 0.5 – 13 mm by 0.5 mm 90° arc,
separate part type
186-105 1 – 7 34 leaves: 1 – 3 mm by 0.25 mm, 3.5 – 7 mm by 0.5 mm 180° arc
186-106 7.5 – 15 32 leaves: 7.5 – 15 mm by 0.5 mm 180° arc
186-107 15.5 – 25 30 leaves: 15.5 – 20 mm by 0.5 mm, 21 – 25 mm by 1 mm 180° arc

 

Inch
Code No. Range (in) Accuracy Composition of leaves Remarks
186-103 1/32 – 17/64 ±0.002 in 16 leaves: 1/32 in – 17/64 in by 64ths 90° arc
186-101 1/32 – 1/4 30 leaves: 1/32 in – 1/4 in by 64ths 180° arc
186-102 17/64 – 1/2 32 leaves: 17/64 in – 1/2 in by 64ths 180° arc
186-104 9/32 – 33/64 16 leaves: 9/32 in – 33/64 in by 64ths 90° arc
186-901* 1/64 – 1/2 25 leaves: 1/64 in – 17/64 in by 64ths, 9/32 in – 1/2 in by 32nds Holder
186-903 1/64 – 17/64 ±0.0016 in 17 leaves: 1/64 in – 17/64 in by 64ths —
186-904 9/32 – 1/2 8 leaves: 9/32 in – 1/2 in by 32nds —
186-905 9/16 – 1 8 leaves: 9/16 in – 1 in by 16ths Holder
186-906 0.010 – 0.500 26 leaves: 0.10 in – 0.30 in by 0.005 in
0.40 in – 0.100 in by 0.010 in
0.120 in – 0.300 in by 0.020 in
0.350 in – 0.500 in by 0.050 in		 Holder
186-907 0.550 – 1 10 leaves: 0.550 in – 1 in by 0.50 in —

 

The post MITUTOYO SERIES 186 – RADIUS GAGES appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MITUTOYO SERIES – PRECISION LEVELS SERIES 960 https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mitutoyo-series-precision-levels-series-960-2/ Mon, 29 Dec 2025 09:36:11 +0000 https://www.cal-laboratory.com/?post_type=product&p=20508 FEATURES High-precision longitudinal and transverse vials make it possible to check or level nsurfaces. Supplied in wooden box. SPECIFICATIONS Metric Order No. Sensitivity Accuracy Dimensions(W x D x H) 960-703 0.02mm/m   +0.006mm 200 x 44 x 200mm   Inch Order No. Sensitivity Accuracy Dimensions W  D  H 960-611 .0012″/12″ +.0006″ 7.87″  1.73″  1.50″ 960-612 .0006″/12″…

The post MITUTOYO SERIES – PRECISION LEVELS SERIES 960 appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> FEATURES

  • High-precision longitudinal and transverse vials make it possible to check or level nsurfaces.
  • Supplied in wooden box.

SPECIFICATIONS

Metric
Order No. Sensitivity Accuracy Dimensions(W x D x H)
960-703 0.02mm/m   +0.006mm 200 x 44 x 200mm

 

Inch
Order No. Sensitivity Accuracy Dimensions
W  D  H
960-611 .0012″/12″ +.0006″ 7.87″  1.73″  1.50″
960-612 .0006″/12″ +.0003″ 7.87″ 1.73″  1.50″
960-613 .00024″/12″ +.00017″ 7.87″ 1.73″  1.50″

The post MITUTOYO SERIES – PRECISION LEVELS SERIES 960 appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MITUTOYO SERIES 468 – DIGIMATIC HOLTEST THREE-POINT INTERNAL MICROMETERS https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mitutoyo-series-468-digimatic-holtest-three-point-internal-micrometers-2/ Mon, 29 Dec 2025 08:40:53 +0000 https://www.cal-laboratory.com/?post_type=product&p=20505 • These three-point bore Digimatic micrometers for inside measurement are suitable for highly accurate measurements. • Can measure deep holes using an extension rod (optional). • Can measure close to the bottom of a blind hole. • Titanium-coated measuring pins provide excellent durability and impact resistance. • Two values can be preset as a reference…

The post MITUTOYO SERIES 468 – DIGIMATIC HOLTEST THREE-POINT INTERNAL MICROMETERS appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> • These three-point bore Digimatic micrometers for inside measurement are
suitable for highly accurate measurements.
• Can measure deep holes using an extension rod (optional).
• Can measure close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two values can be preset as a reference point, allowing you to store multiple
measured values of setting rings and to quickly prepare for measurement.

SPECIFICATIONS

Metric
Code No. Range*2 (mm) Resolution (mm) Maximum
permissible error
JMPE (µm)*1		 Extension
Rod
(optional)
468-161 6 – 8 0.001 ±2 (maximum
difference 2)		 952322
(100 mm)
468-162 8 – 10
468-163 10 – 12
468-164 12 – 16 ±3 (maximum
difference 3)		 952621

(150 mm)
468-165 16 – 20
468-166 20 – 25 952622
(150 mm)
468-167 25 – 30
468-168 30 – 40
468-169 40 – 50
468-170 50 – 63 952623
(150 mm)
468-171 62 – 75 ±4 (maximum
difference 4)
468-172 75 – 88
468-173 87 – 100
468-174 100 – 125 ±5 (maximum
difference 5)
468-175 125 – 150
468-176 150 – 175
468-177 175 – 200
468-178 200 – 225 ±6 (maximum
difference 6)
468-179 225 – 250
468-180 250 – 275
468-181 275 – 300

 

Inch/Metric
Code No. Range*2 (mm) Resolution (mm) Maximum
permissible error
JMPE (µm)*1		 Extension
Rod
(optional)
468-261 0.275 – 0.35 0.00005 in /
0.001 mm		 ±0.0001
(maximum difference
0.0001)		 952322
(100 mm)
468-262 0.35 – 0.425
468-263 0.425 – 0.5
468-264 0.5 – 0.65 ±0.00015
(maximum
difference
0.00015)		 952621

(150 mm)
468-265 0.65 – 0.8
468-266 0.8 – 1 952622
(150 mm)
X468-267 1 – 1.2
468-268 1.2 – 1.6
468-269 1.6 – 2
468-270 2 – 2.5 952623
(150 mm)
468-271 2.5 – 3 ±0.0002
(maximum difference
0.0002)
468-272 3 – 3.5
468-273 3.5 – 4
468-274 4 – 5 0.0001 in /
0.001 mm		 ±0.00025
(maximum
difference
0.00025)
468-275 5 – 6
468-276 6 – 7
468-277 7 – 8
468-278 8 – 9 ±0.0003
(maximum
difference
0.0003)
468-279 9 – 10
468-280 10 – 11
468-281 11 – 12

• Power source: SR44 battery (1 pc.), 938882 included as standard (for operational checks)
• Battery life: Approx. 1.2 years under normal use
• Position detection method: Electromagnetic induction-type rotary encoder
*1 Additionally, the difference in permissible error allowable is limited to a value within this range, as given in parentheses, and
is measured with the entire measuring surface in contact with the object measured.
*2 The measurement range cannot be enlarged by measuring heads that are not standard-supplied (the accuracy is not guaranteed). Note: Setting rings are optional.

The post MITUTOYO SERIES 468 – DIGIMATIC HOLTEST THREE-POINT INTERNAL MICROMETERS appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MITUTOYO – DIAL DEPTH GAGE https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mitutoyo-dial-depth-gage-2/ Mon, 29 Dec 2025 07:32:59 +0000 https://www.cal-laboratory.com/?post_type=product&p=20500 • Optimal for hole, narrow groove and step measurement. SPECIFICATIONS Metric Code No. Range (mm) Graduation (mm) Stroke (mm) Accuracy (µm) Measuring force (N) Base W (mm) T (mm) Flatness (µm) Mounting position of a dial indicator 7210A 0 – 10 0.01 10 ±15 1.4 or less 40 16 5 1 7211A 0 – 200…

The post MITUTOYO – DIAL DEPTH GAGE appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> • Optimal for hole, narrow groove and step
measurement.

SPECIFICATIONS

Metric
Code No. Range
(mm)		 Graduation
(mm)		 Stroke
(mm)		 Accuracy
(µm)		 Measuring
force (N)		 Base
W
(mm)		 T
(mm)		 Flatness
(µm)		 Mounting position
of a dial indicator
7210A 0 – 10 0.01 10 ±15 1.4 or less 40 16 5 1
7211A 0 – 200 63.5
7212A 101.6
7213A 0 – 210 30 ±30 2.5 or less 63.5
7214A 101.6
7220A 0 – 200 10 ±15 1.4 or less 100 18 2
7221A 150 3
7222A 0 – 10 ø16 1
7223A ø25
7224A ø40
7231A 0 – 200 5 63.5 16

The post MITUTOYO – DIAL DEPTH GAGE appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> MITUTOYO SERIES 128 – DEPTH MICROMETER https://www.cal-laboratory.com/en/product/products-en/dimension-en-products-en/mitutoyo-series-128-depth-micrometer-2/ Mon, 29 Dec 2025 05:12:40 +0000 https://www.cal-laboratory.com/?post_type=product&p=20495 • Measuring rod diameter: ø4 mm. • With measuring rod clamp. Note: The clamp is unseen in the picture. • Carbide-tipped measuring rod model is available • With ratchet stop for constant measuring force. Metric               Code No. Range (mm) Graduation (mm) Maximum permissible error JMPE (μm) Flatness of…

The post MITUTOYO SERIES 128 – DEPTH MICROMETER appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]> • Measuring rod diameter: ø4 mm.
• With measuring rod clamp. Note: The clamp is unseen in the picture.
• Carbide-tipped measuring rod model is available
• With ratchet stop for constant measuring force.

Metric              
Code No. Range
(mm)		 Graduation
(mm)		 Maximum permissible
error JMPE (μm)		 Flatness of reference
surface (base) (μm		 Flatness of measuring
face (rod) (μm)		 Parallelism between reference
face and measuring rod face (μm)		 Base
(mm)
128-101 0 – 25

 0.01

 ±3

 1.3 0.3
 within 5 63.5×16
128-103*
128-102 2
 101.6×16

128-104*

 

Inch              
Code No. Range
(in)		 Graduation
(in)		 Maximum permissible
error JMPE (in) 		Flatness of reference
surface (base) (in)		 Flatness of measuring
face (rod) (in)		 Parallelism between reference
face and measuring rod face (in)		 Base (in)
128-105 0 – 1 0.001 ±0.00015 0.000052 0.000012 within 0.00025 2.5×0.63
128-106 0.00008 4×0.63

The post MITUTOYO SERIES 128 – DEPTH MICROMETER appeared first on Calibration Laboratory (CLC) l Calibration service, sale, repair of all kinds of measuring instruments..

]]>