ASIMETO SERIES- 315 ABS HEVY DUTY DIGITAL CALIPERS (WITH UPPER JAWS)

Features

  • Resolution: .0005″ / 0.01mm
  • Designed with fine adjustment to allow precise movement of the slider
  • Internal measurement jaws are rounded to provide accurate measurement of internal diameters
  • Minimum internal diameter measurement capability of 20mm
  • Inch/Metric conversion
  • Zero setting at any position
  • Models are available with or without upper jaws Absolute delivery reliable measurement
  • Cable data output: 900-05-4/5Wireless data output:Transmitting Device:901-00-4/6Receiver Device: 901-00-3
  • Bluetooth data output: 901-01-2/4
Range Resolution Accuracy Jaw Length Code No.
0-300mm / 0-12″ 0.01mm ± 0.04mm 90mm 315-12-8
0-500mm / 0-20″ 0.01mm ± 0.05mm 150mm 315-20-8
0-800mm / 0-32″ 0.01mm ± 0.07mm 150mm 315-32-8
0-1000mm / 0-40″ 0.01mm ± 0.07mm 150mm 315-40-8

 

 

 

ASIMETO SERIES- 315 ABS HEVY DUTY DIGITAL CALIPERS (WITHOUT UPPER JAWS)

Features

  • Resolution: .0005″ / 0.01mm
  • Designed with fine adjustment to allow precise movement of the slider
  • Internal measurement jaws are rounded to provide accurate measurement of internal diameters
  • Minimum internal diameter measurement capability of 20mm
  • Inch/Metric conversion
  • Zero setting at any position
  • Models are available with or without upper jaws Absolute delivery reliable measurement
  • Cable data output: 900-05-4/5Wireless data output:Transmitting Device:901-00-4/6Receiver Device: 901-00-3
  • Bluetooth data output: 901-01-2/4

WITHOUT UPPER JAWS

Inch  Metric     Dimensions
Code No.  Range Resolution Accuracy Range Resolution Accuracy Jaw Length L A D E F
315-12-6 0-12″ .0005″ ±.0015″ 0-300mm 0.01mm ±0.04mm 90mm 470mm 90mm 20mm 5mm 18mm
315-20-6 0-20″ .0005″ ±.002″ 0-500mm 0.01mm ±0.05mm 150mm 680mm 150mm 24mm 10mm 18mm
315-24-6 0-24″ .0005″ ±.002″ 0-600mm 0.01mm ±0.05mm 100mm 730mm 100mm 24mm 10mm 18mm
351-32-6 0-32″ .0005″  ±.003″ 0-800mm 0.01mm ±0.07mm 150mm 1030mm 150mm 30mm 10mm 25mm
315-40-6 0-40″ .0005″  ±.003″ 0-1000mm 0.01mm ±0.07mm 150mm 1230mm 150mm 30mm 10mm 25mm

 

 

 

ASIMETO SERIES-311 LONG JAW VERNIES CALIPERS (MONO BLOCK)

Features

  • Graduation : Inch: .001″ Metric: 0.02mm or 0.05 mm
  • Stainless steel
  • Models available with an assortment of Metric/Inch  scale configurations
  • Designed with fine adjustment to allow precise movement of the slider
  • Internal measurement jaws are rounded to provide accurate measurement of internal diameters

MONO BLOCK MODELS

Dimensions
Code No. Lower Range Upper Range Lower Graduation Upper Graduation Accuracy L A D E F
311-12-3 0-12″ 0-300m .001″ 0.002mm ±.0015″ 450mm 90mm 20mm 5mm 12mm
311-20-3 0-20″ 0-500mm .001″ 0.002mm ±.0020″ 735mm 200mm 31mm 10mm 24mm
311-30-3 0-30″ 0-750mm .001″ 0.002mm ±.0020″ 985mm 200mm 31mm 10mm 2400
311-40-3 0-40″ 0-1000mm  .001″ 0.002mm ±.0030″ 1235mm 200mm 31mm 10mm 24mm
311-12-4 0-300mm 0-12″ 0.02mm .001″ ±0.04mm 450mm 90mm 20mm 5mm 12mm
311-20-4 0-500mm 0-20″ 0.02mm .001″ ±0.05mm 735mm 200mm 31mm 10mm 24mm
311-30-4 0-750mm 0-30″ 0.02mm .001″ ±0.07mm 985mm 200mm 31mm 10mm 24mm
311-40-4 0-1000mm 0-40″ 0.02mm .001″ ±0.07mm 1235mm 200mm 31mm 10mm 24mm
311-12-6 0-300mm 0-12″ 0.05mm 1/128″ ±0.05mm 450mm 90mm 20mm 5mm 12mm
311-20-6 0-500mm 0-20″ 0.05mm 1/128″ ±0.08mm 735mm 200mm 31mm 10mm 24mm
311-30-6 0-750mm 0-30″ 0.05mm 1/128″ ±0.10mm 985mm 200mm 31mm 10mm 24mm
311-40-6 0-1000mm 0-40″ 0.05mm 1/128″ ±0.10mm 1235mm 200mm 31mm 10mm 24mm

 

ASIMETO SERIES-147 DIGITAL TUBE MICROMETERS

Features

  • Resolution: .00005″ / 0.001mm
  • Protection level IP65
  • For measuring wall thickness of various tubes
  • Carbide tipped measuring faces
  • Ratchet stop
  • Anvils J and Anvils K are optional
  • Inch/Metric conversion
  • Read the actual absolute measuring position upon switching on the display
  • Automatic On/Off to maximize battery life
  • Absolute or incremental measuring modes
  • Grey painted steel frame
Code No. Range Accuracy Anvil Type
147-01-0 0-25mm/0-1″ ±0.002 mm J
147-02-0 25-50mm/1-2″ ±0.002 mm J
147-03-0 50-75mm/2-3″ ±0.003 mm J
147-04-0 75-100mm/3-4″ ±0.003 mm J
147-01-2 0-25mm/0-1″ ±0.002 mm K
147-02-2 25-50mm/1-2″ ±0.002 mm K
147-03-2 50-75mm/2-3″ ±0.003 mm K
147-04-2 75-100mm/3-4″ ±0.003 mm K

ASIMETO SERIES-126 POINT MICROMETERS

Features

  • Resolution: Digital reading: .00005″ / 0.001mm Scale on digital models: .0001″ / 0.01mm
  • 15 degree and 30 degree measuring points are avaiable
  • For measuring the web thickness of drills, small groove, and other hard to reach dimensions
  • Carbide tipped measuring faces
  • Ratchet stop
  • Inch/Metric conversion
  • Read the actual absolute measuring position upon switching on the display
  • Automatic On/Off to maximize battery life
  • Absolute or incremental measuring modes
  • Protection level IP65 
Code No. Range Accuracy Anvil Type
126-01-0 0-25 mm / 0-1″ ±0.002 mm 15°
126-02-0 25-50 mm / 1-2″ ±0.002 mm 15°
126-03-0 50-75 mm / 2-3″ ±0.003 mm 15°
126-04-0 75-100 mm / 3-4″ ±0.003 mm 15°
126-01-2 0-25 mm / 0-1″ ±0.002 mm 30°
126-02-2 25-50 mm / 1-2 ±0.002 mm 30°
126-03-2 50-75 mm / 2-3″ ±0.003 mm 30°
126-04-2 75-100 mm / 3-4″ ±0.003 mm 30°

ASIMETO SERIES-117 DIGITAL BLADE MICROMETERS

Features

  • Resolution: .00005″ / 0.001mm
  • Ratchet stop
  • For measuring the groove diameter of shafts, keyways, and other hard to reach portion
  • Non-rotating spindle
  • Carbide tipped measuring faces
  • Inch/Metric conversion
  • Read the actual absolute measuring position upon switching on the display
  • Automatic On/Off to maximize battery life
  • Absolute or incremental measuring modes
Code No. Range Accuracy Anvil Type
117-01-0 0-25 mm / 0-1″ ±0.002 mm A
117-02-0 25-50mm / 1-2″ ±0.002 mm A
117-03-0 50-75mm / 2-3″ ±0.003 mm A
117-04-0 75-100mm / 3-4″ ±0.003 mm A
117-05-0 100-125mm / 4-5″ ±0.003 mm A
117-06-0 125-150mm / 5-6″ ±0.003 mm A
117-01-2 0-25 mm / 0-1″ ±0.002 mm B
117-02-2 25-50mm / 1-2″ ±0.002 mm B
117-03-2 50-75mm / 2-3″ ±0.003 mm B
117-04-2 75-100mm / 3-4″ ±0.003 mm B
117-05-2 100-125mm / 4-5″ ±0.003 mm B

ASIMETO SERIES-207 DIGITAL INSIDE MICROMETERS

Features

  • Resolution: .00005″ / 0.001mm
  • Designed for the measurement of intricate internal characteristics
  • Solid carbide pins for measurement contact points
  • .2-1.2″ / 5-30mm and 1-2″ / 25-50mm range are supplied with setting ring
  • Ratchet stop
Code No. Range Accuracy
207-01-0 5-30mm / .2-1.2″ ±0.003 mm
207-02-0 25-50mm / 1-2″ ±0.003 mm
207-03-0 50-75mm / 2-3″ ±0.004 mm
207-04-0 75-100mm / 3-4″ ±0.004 mm
207-05-0 100-125mm / 4-5″ ±0.005 mm
207-06-0 125-150mm / 5-6″ ±0.005 mm
207-07-0 150-175mm / 6-7″ ±0.005 mm
207-08-0 175-200mm / 7-8″ ±0.005 mm

ASIMETO – SERIES 307 DIGITAL CALIPERS (THREE BUTTONS)

Features

  • Resolution： .0005″ / 0.01mm
  • Extra large LCD readout
  • The origin position is retained through the On/Off cycle
  • Inch/Metric conversion
Code No. Range Inch Accuracy Inch Range Metric Accuracy Metric
307-06-5 0-6″ +/- 0.001″ 0-150mm +/- 0.02mm
307-08-5 0-8″ +/- 0.0015″ 0-200mm +/- 0.03mm
307-12-5 0-12″ +/- 0.0015″ 0-300mm +/- 0.03mm

Dimension

 

ASIMETO IP67 BIG SCREEN DIGITAL CALIPER 305 SERIES

ASIMETO IP67 BIG SCREEN DIGITAL CALIPER 305 Series

Features

  • Resolution: .0005” / 0.01mm
  • Large screen: (53.5 x 15.5mm) LCD display area
  • Auto power off, extend battery life
  • Inch / Metric conversion
  • Memory function: Keep the reading even after the display is turned off
  • Conforms to the IP67 ratings
Code No. Range Inch Accuracy Inch Range Metric Accuracy Metric
305-06-5 0-6″ +/- 0.001″ 0-150mm +/- 0.02mm
305-08-5 0-8″ +/- 0.0015″ 0-200mm +/- 0.03mm
305-12-5 0-12″ +/- 0.0015″ 0-300mm +/- 0.03mm

 

 

ASIMETO SERIES-203 lNSIDE MICROMETERS

Features

  • Resolution：.001″ / 0.01mm
  • Designed for the measurement of intricate internal characteristics
  • Satin chrome finished
  • .2-1.2″ / 5-30mm and 1-2″ / 25-50mm range are supplied with Setting Ring
  • Ratchet stop

 

Range Resolution Accuracy Code No.
5-30mm 0.01mm 0.005mm 203-01-0
25-50mm 0.01mm 0.006mm 203-02-0
50-75mm 0.01mm 0.007mm 203-03-0
75-100mm 0.01mm 0.008mm 203-04-0
100-125mm 0.01mm 0.009mm 203-05-0
125-150mm 0.01mm 0.009mm 203-06-0
150-175mm 0.01mm 0.010mm 203-07-0
175-200mm 0.01mm 0.010mm 203-08-0
Exit mobile version