ASIMETO – SERIES 209 THREE POINT INTERNAT MICROMETERS

ASIMETO   –  Three Point Internal Micrometers 209 Series (100-300mm/4.0-12.0″)

FEATURES

  • Graduation:.0002″ / 0.005mm
  • Ratchet stop
  • Measuring contact points are designed to allow measurements near to the bottom of blind holes
  • Additional extensions can be added to increase the measuring depth
  • Measuring surfaces are carbide
  • Setting ring are not included with the set but are optional

 

Inch Optional Dimensions
Code No. Range Accuracy Setting Ring L1 Extension Rod
209-34-1 4-5” ±.0002” 4” 145mm 150mm
209-35-1 5-6” ±.0002” 5” 145mm 150mm
209-36-1 6-7” ±.0002” 6” 145mm 150mm
209-37-1 7-8” ±.0002” 7” 145mm 150mm
209-38-1 8-9” ±.00028” 8” 145mm 150mm
209-39-1 9–10” ±.00028” 9” 145mm 150mm
209-40-1 10-11” ±.00028” 10” 145mm 150mm
209-41-1 11-12” ±.00028” 11′ 145mm 150mm

 

 

Metric Optional Dimensions
Code No. Range Accuracy Setting Ring L1 Extension Rod
209-34-0 100-125mm 0.005mm 100mm 145mm 150mm
209-35-0 125-150mm 0.005mm 125mm 145mm 150mm
209-36-0 150-175mm 0.005mm 150mm 145mm 150mm
209-37-0 175-200mm 0.005mm 175mm 145mm 150mm
209-38-0 200-225mm 0.007mm 200mm 145mm 150mm
209-39-0 225-250mm 0.007mm 225mm 145mm 150mm
209-40-0 250-275mm 0.007mm 250mm 145mm 150mm
209-41-0 275-300mm 0.007mm 275mm 145mm 150mm

ASIMETO-SERIES 242 INSIDE MICROMETERS – INTERCHANGEABLE ROD TYPE

FEATURES

  • Graduation: .001″ / 0.01mm.
  • Accuracy:
    Metric (6 + L / 50) mm
    Inch [0.0003 + 0.00005 (L / 2)]”
    L = Maximun measuring length (mm) / inch
  • Rods marked with its measuring range
  • Satin chrome finish throughout
  • All contact points hardened for extra long tool life
  • With locking clamp
  • Zero point can be readjusted by rotating the micrometer head sleeve
  • Carbide tipped measuring faces

 

Range Head Travel Graduation Note Code No.
25-50mm 7.0mm 0.01mm 25mm Mic head & 2 Rods 242-02-0
50-2000mm 13mm 0.01mm 50mm Mic head & 6 Rods 242-08-0
50-300mm 13mm 0.01mm 50mm Mic head & 10 Rods 242-12-0
200-500mm 25mm 0.01mm 200mm Mic head & 3 Rods 242-20-0
200-1000mm    25mm 0.01mm 200mm Mic head & 8 Rods 242-40-0

ASIMETO-SERIES 201 DEPTH MICROMETERS

FEATURES

  • Resolution: .001″ / 0.01mm
  • Micrometers Head accuracy: (0-25mm / 0-1″)
    Metrio: 0.004mm
    Inch: ± .0001″
  • Measuring inserts accuracy:
    Metric: ± (2 + L / 75) um
    Inch: ± [0.001 + 0.0005 (L / 3)]”
    L = Maximun measuring length (mm) (inch)
  • The integrity of the measurements are maintained throughout the total range of the measuring rods. However the measuring rods must be kept as a set and may not be interchangeable with other depth micrometers sets
  • Both flat and spherical depth rod sets are available
Range Base Length Rods Anvil Type Notes Code No.
0-2″ 63mm 2 pcs Flat End Run Through 201-02-0
0-4″ 63mm 4 pcs Flat End Run Through 201-04-0
0-6″ 63mm 6 pcs Flat End Run Through 201-06-0
0-12″ 63mm 12 pcs Flat End Run Through 201-12-0
0-4″ 101.5mm 4 pcs Flat End Run Through 201-04-2
0-6″ 101.5mm 6 pcs Flat End Run Through 201-06-2
0-12″ 101.5mm 12 pcs Flat End Run Through 201-12-2
0-2″ 63mm 2 pcs Spherical End Run Through 201-52-0
0-4″ 63mm 4 pcs Spherical End Run Through 201-54-0
0-6″ 63mm 6 pcs Spherical End Run Through 201-56-0
0-12″ 63mm 12 pcs Spherical End Run Through 201-62-0
0-4″ 101.5mm 4 pcs Spherical End Run Through 201-54-2
0-6″ 101.5mm 6 pcs Spherical End Run Through 201-56-2
0-12″ 101.5mm 12 pcs Spherical End Run Through 201-62-2
0-4″ 57mm 4 pcs Flat End Half-base 201-04-7
0-6″ 57mm 6 pcs Flat End Half-base 201-06-7

ASIMETO-SERIES 644 HANDHELD REFRACTOMETERS

FEATURES

  • Handheld refractometers are barely bigger than a torch and can be used anywhere in mobile applications.
  • Automatic temperature compensation.
Range Accuracy Code No.
0-32% 0.2% 644-01-0

ASIMETO-SERIES 640 SHORE SCALE A DUROMETER

FEATURES

  • Used for precisely determining the shore hardness value of rubber & plastic materials.
Range Graduation Accuracy Suitable For Code No.
10-90HA 1HA ± 1HA Soft vulcanized rubber, Natural rubber,
Thermoplastic elastomer,
Flexible polypropylene, Thermosetting plastic,
Paraffin wax, Felt, Leather, etc.		 640-06-0
20-90HD 1HD ± 1HD Hard rubber, Thermoplastic elastomer, Hard plastic,
Hard thermosetting plastic, etc.		 640-06-1

ASIMETO-SERIES 640 DIGITAL SHORE DUROMETER HARDNESS TESTER

FEATURES

  • Resolution: 0.1H
  • 128 x 64 LDC display
  • Measurement mode: Averaging mode, Max mode, Timer mode
  • Tolerance warning alarm
  • Data storage, printing, uploading
  • USB data output
  • Wireless printing capability
  • Shore A application range: soft vulcanized rubber, natural rubber, nitriles thermoplastic elastomers, flexible polyacrylics and thermosets, wax, felt, leathers, etc.
  • Shore D application range: hard rubber, thermoplastic elastomers, harder plastics, thermoplastics, etc.
Range Type Resolution Accuracy Code No.
0-100HA Shore A 0.1HA ±0.1HA 640-06-5
0-100HD Shore D 0.1HD ±0.1HD 640-06-6

ASIMETO-SERIES 645 SURFACE ROUGHNESS TESTER

FEATURES

  • 3.5-inch color graphic touch screen, provide high brightness, wide viewing angle.
  • Display full information, intuitive and graphical displays all parameters.
  • DSP chip control and data processing, high speed, low power consumption.
  • 4 profile filter: Gauss, RC, PC-RC, D-P.
  • Multi parameters: Ra, Rz, Rq, Rt, Rp, Rv, R3z, R3y, Rz(JIS), Rs, Rsk, Rsm, Rku, Rc, Ry, Rmax, Rmr, RPc, Rk, Rpk, Rvk, Mr1, Mr2.
  • Complies standards: ISO, DIN, ANSI, JIS
  • Support Bluetooth printer and mobile APP wireless operation.
  • Large capacity data storage, can store 100 item of raw data and measured profile.
  • Automatic sleep, automatic shutdown power-saving features.
  • Able to connect to the computer and printer.
  • Optional accessories include curved surface sensor, deep groove sensor, small hole sensor, measurement stand, Sleeve of sensor, printer and analysis software.
Code No. 645-13-0
Measuring range X axis: 17.5μm / 0.69″
Measuring range Z axis: 320μm (-160μm – 160μm) / 12600μin (-6300μin – 6300μin)
Sampling length 0.25, 0.8, 2.5mm
Measuring speed 0.135, 0.5, 1mm/s, 1mm/s (return)
Measuring speed 0.135, 0.5, 1mm/s, 1mm/s (return)
Measuring force 4mN
Stylus tip Diamond, 90° / 5μmR tip radius
Size Control unit: 160x64x53mm
Size Drive unit: 115x23x27mm
Power supply Built-in 3200mAh rechargeable Lithium ion battery; AC Adapter

ASIMETO-SERIES 701 DIGITAL FORCE GAUGE

FEATURES

  • Automatic sensor detection for Push, Pull and Pressure test.
  • Units options: N, kgf, lbf, gf, ozf, KN 
  • Overload protection mechanism.
  • Physical buttons to minimize disturbance.
  • Graphic or Numerical display mode
  • Automatic reversible display.
  • Upper and lower limit alarms and conclusion output.
  • Automatic power off.
  • Metal case.
Model Sensor Model Range Resolution Accuracy Testing Mode Code No.
ASFG10S-2K-S ASP-F2K-S 2,000 N 0.5 N ±0.2% F.S. Push, Pull 701-50-0
ASFGS10S-5K-S ASP-F5K-S 5,000 N 0.5 N ±0.2% F.S. Push, Pull 701-50-1
ASFGS10S-10K-S ASP-F10K-S 10,000 N 1 N ±0.2% F.S. Push, Pull 701-50-2
ASFGS10S-10K-R ASP-F10K-R 10,000 N 1 N ±0.2% F.S. Pressure 701-50-3
ASFGS10S-50K-R ASP-F50K-R 50,000 N 5 N ±0.2% F.S. Pressure 701-50-4
ASFGS10S-100K-R ASP-F100K-R 100,000 N 10 N ±0.2% F.S. Pressure 701-50-5
ASFGS10S-200K-R ASP-F100K-R 200,000 N 50 N ±0.2% F.S. Pressure 701-50-6

ASIMETO-SERIES 701 DIGITAL FORCE GAUGE

FEATURES

  • Push and pull test.
  • Units options: N, kgf, lbf, gf, ozf, mN 
  • Reverse display setting.
  • Overload protection mechanism.
  • Physical buttons to minimize disturbance.
  • Compression force gauges take mechanical overload protection.
  • Graphic or Numerical display mode.
  • Automatic power off.
  • Metal case.
Model Loading
Capacity		 Resolution Accuracy Measurement
Mode		 Code No.
ASFG 10 10 N 0.01 N ±0.3% F.S. Track, Peak, Preset Peak 701-30-0
ASFG 50 50 N 0.01 N ±0.3% F.S. Track, Peak, Preset Peak 701-30-1
ASFG 100 100 N 0.1 N ±0.3% F.S. Track, Peak, Preset Peak 701-30-2
ASFG 200 200 N 0.1 N ±0.3% F.S. Track, Peak, Preset Peak 701-30-3
ASFG 500 500 N 0.1 N ±0.3% F.S. Track, Peak, Preset Peak 701-30-4
ASFG 1000 1,000 N 1 N ±0.3% F.S. Track, Peak, Preset Peak 701-30-5
Exit mobile version