MITUTOYO SERIES 573 – ABSOLUTE CENTER-TO-CENTER & EDGE-TO-CENTER TYPES

Download: Mitutoyo SERIES 573 – ABSOLUTE Center-to-Center & Edge-to-Center Types

• Specially designed to measure hole Center to-Center and Edge-to-Center distances.
Provided with jaws on the back of the slider, measurements can be read easily from above.
• Direct reading of pitch measurements is available due to the offset value setting function.

SPECIFICATIONS

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-718-20*1	10.1 – 200	0.01	–	±0.10
573-719-20*1	10.1 – 300			±0.15

• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)
• Scale type: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed: Unlimited
*1 Applicable hole diameter: ø1.5 – ø19.5 mm
*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-716-20*1	10.1 – 200	0.01	–	±0.10
573-717-20*1	10.1 – 300			±0.15

MITUTOYO SERIES 573 – ABSOLUTE CENTER-TO-CENTER & EDGE-TO-CENTER TYPES

Download: Mitutoyo SERIES 573 – ABSOLUTE Center-to-Center & Edge-to-Center Types

SPECIFICATIONS

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-718-20*1	10.1 – 200	0.01	–	±0.10
573-719-20*1	10.1 – 300			±0.15

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-716-20*1	10.1 – 200	0.01	–	±0.10
573-717-20*1	10.1 – 300			±0.15

MITUTOYO SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES BLADE TYPE CALIPER

Download : MITUTOYO SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES BLADE TYPE CALIPER

• The thin blade-type jaws fit into very small grooves.
• The outside measuring faces are carbide tipped.
• Allows step measurement.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.

SPECIFICATIONS

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-634-20	0-150	0.01	±0.02	±0.04
573-635-20*1	0-150		±0.02	±0.04

INCH/METRIC

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-721-20	0-6 in / 0-150 mm	0.0005 in /0.01 mm	±0.001 in/±0.02 mm	±0.002 in/±0.04 mm

MITUTOYO SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES POINT CALIPER

Download: Mitutoyo series 573 – Point Caliper

• Narrow-tip jaws fit into very small grooves and tracks.
• Allows step measurement.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.

SPECIFICATIONS

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
Order No	Range (mm)	Resolution (mm)	EMPE	SMPE
573-621-20	0 – 150	0.01	±0.02	±0.04
573-625-20	0 – 150		±0.02	±0.04
573-622-20*1	0 – 150		±0.02	±0.04
573-626-20*1	0 – 150		±0.02	±0.04

INCH/METRIC

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-721-20	0 – 6 in/0 – 150 mm	0.0005 in/0.01 mm	±0.001 in/±0.02 mm	±0.002 in/±0.04 mm
573-725-20

• Dust/Water protection level: IP67 (IEC 60529)*3
• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)
• Battery life: Approx. 5 years under normal use
• Scale type: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed: Unlimited
• With depth bar
*1 Without thumb roller
*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.
*3 Rustproofing shall be applied after use if caliper was in contact with coolant.

MITUTOYO SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES POINT CALIPER

Download: Mitutoyo series 573 – Point Caliper

• Narrow-tip jaws fit into very small grooves and tracks.
• Allows step measurement.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.

SPECIFICATIONS

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
Order No	Range (mm)	Resolution (mm)	EMPE	SMPE
573-621-20	0 – 150	0.01	±0.02	±0.04
573-625-20	0 – 150		±0.02	±0.04
573-622-20*1	0 – 150		±0.02	±0.04
573-626-20*1	0 – 150		±0.02	±0.04

INCH/METRIC

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-721-20	0 – 6 in/0 – 150 mm	0.0005 in/0.01 mm	±0.001 in/±0.02 mm	±0.002 in/±0.04 mm
573-725-20

MITUTOYO SERIES 573 – ABSOLUTE DIGIMATIC TYPE OFFSET CALIPER

Download: Mitutoyo SERIES 573 — ABSOLUTE Digimatic type Offset Caliper

SPECIFICATIONS

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
Order No.	Range (mm)	Resolution (mm)	EMPE	SMPE
573-601-20	0 – 150	0.01	±0.02	±0.04
573-611-20*1	0 – 150		±0.02	±0.04
573-602-20	0 – 200		±0.02	±0.04
573-612-20*1	0 – 200		±0.02	±0.04
573-604-20	0 – 300		±0.03	±0.05
573-614-20*1	0 – 300		±0.03	±0.05

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-701-20	0 – 6 in/0 – 150 mm	0.0005 in/0.01 mm	±0.001 in/±0.02 mm	±0.002 in/±0.04 mm
573-702-20	0 – 8 in/0 – 200 mm
573-704-20	0 – 12 in/0 – 300 mm		±0.0015 in/±0.03 mm	±0.0025 in/±0.05 mm

• Dust/Water protection level: IP67 (IEC 60529)*3
• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)
• Battery life: Approx. 5 years under normal use
• Scale type: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed: Unlimited
*1 Without thumb roller
*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.
*3 Rustproofing shall be applied after use if caliper was in contact with coolant.

MITUTOYO SERIES 573 ABSOLUTE BACK-JAW CENTERLINE CALIPER

Download: Mitutoyo Series 573 Data Sheet

SPECIFICATIONS

Metric Center-to-center distance type

Range	Order No.	Accuracy	Resolution	Mass (g)
10 – 200mm	573-116-10	±0.10mm	0.01mm	482
10 – 300mm	573-117-10	±0.15mm	0.01mm	578

Metric Edge-to-center distance type

Range	Order No.	Accuracy	Resolution	Mass (g)
10 – 200mm	573-118-10	±0.10mm	0.01mm	485
10 – 300mm	573-119-10	±0.15mm	0.01mm	581

MITUTOYO SERIES 573 INSIDE GROOVE TYPE ABSOLUTE INSIDE CALIPER

Download :MITUTOYO SERIES 573 INSIDE GROOVE TYPE ABSOLUTE INSIDE CALIPER

• Dedicated caliper for inside measurement.

• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.

SPECIFICATIONS

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)3**		Remarks
Order No.	Range (mm)	Resolution (mm)	EMPE	SMPE	Remarks
573-642-20	10 – 200	0.01	–	±0.05	Knife-edge type, Measurable min.
573-643-20*1	10 – 200			±0.05	Knife-edge type, Measurable min.
573-645-20*2	10.1 – 160			±0.05	inside groove type, Measurable min.
573-647-20*1	10.1 – 160			±0.05	Inside groove type, Measurable min.
573-646-20*2	20.1 – 170			±0.03	Point jaw type, Measurable min.
573-648-20*1	20.1 – 170			±0.03	Point jaw type, Measurable min.

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)3**		Remarks
			EMPE	SMPE
573-742-20	0.4 – 8 in/ 10 – 200 mm	0.0005 in/ 0.01 mm	–	±0.002 in/ ±0.05 mm	Knife-edge type, Measurable min.
573-745-20*2	0.404 – 6.4 in/ 10.26 – 160.16 mm			±0.002 in/ ±0.05 mm	Inside groove type, Measurable min.
573-746-20*2	0.804 – 6.8 in/ 20.42 – 170.32 mm			±0.0015 in/ ±0.03 mm	Point jaw type, Measurable min.

• Dust/Water protection level: IP67 (IEC 60529)*4
• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)
• Battery life: Approx. 5 years under normal use
• Scale type: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed: Unlimited
*1 Without thumb roller
*2 Includes the offsetting function, which indicates the actual measurement value.
*3 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.
*4 Rustproofing shall be applied after use if caliper was in contact with coolant.

MITUTOYO SERIES 573 KNIFE-EDGE TYPE ABSOLUTE INSIDE CALIPER

Download : MITUTOYO SERIES 573 KNIFE-EDGE ABSOLUTE INSIDE CALIPER

• Dedicated caliper for inside measurement.

• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.

SPECIFICATIONS

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)3**		Remarks
Order No.	Range (mm)	Resolution (mm)	EMPE	SMPE	Remarks
573-642-20	10 – 200	0.01	–	±0.05	Knife-edge type, Measurable min.
573-643-20*1	10 – 200			±0.05	Knife-edge type, Measurable min.
573-645-20*2	10.1 – 160			±0.05	inside groove type, Measurable min.
573-647-20*1	10.1 – 160			±0.05	Inside groove type, Measurable min.
573-646-20*2	20.1 – 170			±0.03	Point jaw type, Measurable min.
573-648-20*1	20.1 – 170			±0.03	Point jaw type, Measurable min.

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)3**		Remarks
			EMPE	SMPE
573-742-20	0.4 – 8 in/ 10 – 200 mm	0.0005 in/ 0.01 mm	–	±0.002 in/ ±0.05 mm	Knife-edge type, Measurable min.
573-745-20*2	0.404 – 6.4 in/ 10.26 – 160.16 mm			±0.002 in/ ±0.05 mm	Inside groove type, Measurable min.
573-746-20*2	0.804 – 6.8 in/ 20.42 – 170.32 mm			±0.0015 in/ ±0.03 mm	Point jaw type, Measurable min.

MITUTOYO SERIES 573 POINT JAW TYPE ABSOLUTE INSIDE CALIPER

Download : MITUTOYO SERIES 573 POINT JAW TYPE ABSOLUTE INSIDE CALIPER

• Dedicated caliper for inside measurement.

• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.

SPECIFICATIONS

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)3**		Remarks
Order No.	Range (mm)	Resolution (mm)	EMPE	SMPE	Remarks
573-642-20	10 – 200	0.01	–	±0.05	Knife-edge type, Measurable min.
573-643-20*1	10 – 200			±0.05	Knife-edge type, Measurable min.
573-645-20*2	10.1 – 160			±0.05	inside groove type, Measurable min.
573-647-20*1	10.1 – 160			±0.05	Inside groove type, Measurable min.
573-646-20*2	20.1 – 170			±0.03	Point jaw type, Measurable min.
573-648-20*1	20.1 – 170			±0.03	Point jaw type, Measurable min.

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)3**		Remarks
			EMPE	SMPE
573-742-20	0.4 – 8 in/ 10 – 200 mm	0.0005 in/ 0.01 mm	–	±0.002 in/ ±0.05 mm	Knife-edge type, Measurable min.
573-745-20*2	0.404 – 6.4 in/ 10.26 – 160.16 mm			±0.002 in/ ±0.05 mm	Inside groove type, Measurable min.
573-746-20*2	0.804 – 6.8 in/ 20.42 – 170.32 mm			±0.0015 in/ ±0.03 mm	Point jaw type, Measurable min.

MITUTOYO SERIES 573-ABSOLUTE DIGIMATIC TYPE OFFSET CALIPER

Download: MITUTOYO SERIES 573 — ABSOLUTE DIGIMATIC TYPE OFFSET CALIPER

SPECIFICATIONS

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
Order No.	Range (mm)	Resolution (mm)	EMPE	SMPE
573-601-20	0 – 150	0.01	±0.02	±0.04
573-611-20*1	0 – 150		±0.02	±0.04
573-602-20	0 – 200		±0.02	±0.04
573-612-20*1	0 – 200		±0.02	±0.04
573-604-20	0 – 300		±0.03	±0.05
573-614-20*1	0 – 300		±0.03	±0.05

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-701-20	0 – 6 in/0 – 150 mm	0.0005 in/0.01 mm	±0.001 in/±0.02 mm	±0.002 in/±0.04 mm
573-702-20	0 – 8 in/0 – 200 mm
573-704-20	0 – 12 in/0 – 300 mm		±0.0015 in/±0.03 mm	±0.0025 in/±0.05 mm

• Dust/Water protection level: IP67 (IEC 60529)*3
• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)
• Battery life: Approx. 5 years under normal use
• Scale type: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed: Unlimited
*1 Without thumb roller
*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.
*3 Rustproofing shall be applied after use if caliper was in contact with coolant.

MITUTOYO SERIES 573-ABSOLUTE DIGIMATIC TYPE OFFSET CENTERLINE CALIPER

Download: Mitutoyo SERIES 573 – ABSOLUTE Digimatic type Offset Centerline Caliper

• Specially designed for hole Center-to Center measurements on the same, or offset, planes.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.

• Digimatic models need the compensation value (engraved on the moving jaw) added to the displayed value for correct
measurement. However, the featured Offset function enables this to be done easily just by pressing the OFFSET button
after the jaws are brought together and the ORIGIN button is pressed.

SPECIFICATIONS

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
Order No.	Range (mm)	Resolution (mm)	EMPE	SMPE
573-605-20	10.1 – 160	0.01	–	±0.03
573-615-20*1	10.1 – 160			±0.03
573-606-20	10.1 – 210			±0.03
573-616-20*1	10.1 – 210			±0.03
573-608-20	10.1 – 310			±0.04
573-618-20*1	10.1 – 310			±0.04

INCH / METRIC

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
573-705-20	0.404 – 6.4 in/10.26 – 160.16 mm	0.0005 in/0.01 mm	–	±0.0015 in/±0.03 mm
573-706-20	0.404 – 8.4 in/10.26 – 210.16 mm
573-708-20	0.404 – 12.4 in/10.26- 310.16 mm			±0.0015 in/±0.04 mm

• Dust/Water protection level: IP67 (IEC 60529)*3
• Battery: SR44 (1 pc.), 938882, for initial operational checks (standard accessory)
• Battery life: Approx. 5 years under normal use
• Scale type: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed: Unlimited
*1 Without thumb roller
*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.
*3 Rustproofing shall be applied after use if caliper was in contact with coolant.

MSA based on German Automotive Group Standard : VDA 5

OHAUS SCOUT PORTABLE BALANCES

Download: OHAUS SCOUT PORTABLE BALANCES

Ideal for laboratory & industrial applications, the OHAUS Scout features an easy to navigate color touchscreen display & a slim design which allows stackable storage. Geared for superior performance with fast stabilization time and high resolution weighing results, these portable balances set a new standard for a broad range of weighing applications. Features also include superior overload protection and expanded connectivity options.

Improved Experience with Backlit Display and 4 Button Operation

Poor lighting environment is not an issue with the Scout. The large,

bright backlit LCD display improves readability in conditions where

lighting is poor, and makes it easy to see the results from a distance.

4 clearly marked buttons remove complexity, and guide you quickly

and easily through setup, unit of measure changes, calibration and more.

Durability Guaranteed with Superior Protective Features

The Scout equipped with superior overload protection rated at 10

times the capacity of the balance, high strength stainless steel pan,

impact-resistant pan support and integrated transportation/storage

lock, delivers the same durable quality that you expect from OHAUS

products. To complement our signature durability, we’ve designed the

Scout to be stackable when utilizing the optional stacking and storage

cover, which also protects the balance when not in use.

Most Versatile Portable Balance in its Class

With the Scout, it’s all about accuracy, efficiency and possibilities!

Stabilization time as fast as 1 second means increased productivity

in any facility or lab. With improved resolution, you can count on

extremely precise and repeatable weighing results. Additionally, the

increased capacity of the Scout gives you more flexibility in your

weighing applications.

Draftshield Model Available

Scout’s ingenious draftshield (1mg models only) was designed with

an easy to remove top cover piece. This serves as a wind protection

ring which keeps the weighing surface stable in rough environments,

while maintaining weighing speed.

Built-in Application Modes

Weighing-Determines the weight of items on the pan in the selected unit of measure.

Parts Counting-Counts the number of pieces on the pan using a uniform weight.

Percent Weighing-Measures the weight of a sample displayed as a percentage of a pre-established reference weight.

Check Weighing-Compares the weight of a sample against target limits.

Totalization-Measures cumulative weight of multiple items. Cumulative total may exceed balance capacity.

Display Hold-Manually holds the last stable weight or the first highest stable weighing value on the display.

OHAUS SCOUT PORTABLE BALANCES

Download: OHAUS SCOUT PORTABLE BALANCES

Improved Experience with Backlit Display and 4 Button Operation

Poor lighting environment is not an issue with the Scout. The large,

bright backlit LCD display improves readability in conditions where

lighting is poor, and makes it easy to see the results from a distance.

4 clearly marked buttons remove complexity, and guide you quickly

and easily through setup, unit of measure changes, calibration and more.

Durability Guaranteed with Superior Protective Features

The Scout equipped with superior overload protection rated at 10

times the capacity of the balance, high strength stainless steel pan,

impact-resistant pan support and integrated transportation/storage

lock, delivers the same durable quality that you expect from OHAUS

products. To complement our signature durability, we’ve designed the

Scout to be stackable when utilizing the optional stacking and storage

cover, which also protects the balance when not in use.

Most Versatile Portable Balance in its Class

With the Scout, it’s all about accuracy, efficiency and possibilities!

Stabilization time as fast as 1 second means increased productivity

in any facility or lab. With improved resolution, you can count on

extremely precise and repeatable weighing results. Additionally, the

increased capacity of the Scout gives you more flexibility in your

weighing applications.

Draftshield Model Available

Scout’s ingenious draftshield (1mg models only) was designed with

an easy to remove top cover piece. This serves as a wind protection

ring which keeps the weighing surface stable in rough environments,

while maintaining weighing speed.

Built-in Application Modes

Weighing-Determines the weight of items on the pan in the selected unit of measure.

Parts Counting-Counts the number of pieces on the pan using a uniform weight.

Percent Weighing-Measures the weight of a sample displayed as a percentage of a pre-established reference weight.

Check Weighing-Compares the weight of a sample against target limits.

Totalization-Measures cumulative weight of multiple items. Cumulative total may exceed balance capacity.

Display Hold-Manually holds the last stable weight or the first highest stable weighing value on the display.

OHAUS VALOR 2000® COMPACT BENCH SCALES

Download : V22PWE1501T 2

Standard Features Include:

• Knife Proof Keypad Prevents Damage from Sharp Objects-Valor 2000 has a
polycarbonate keypad that can endure contact with knives or sharp instruments used daily in
demanding food preparation, processing and portioning applications.
• Flow-Thru Design Protects Valor 2000 in Harsh Environments-Safe to use in the
weighing of liquids and in wet environments, Valor 2000 is NSF Certified and has an IPX8
flow-thru design which channels fluids that may enter the housing through strategically
located drain holes, ensuring the scale remains clean and operational.
• Fast Speed and Large Dual Displays Allows More than One Operator to Easily Work on
Valor 2000—With less than a one second stabilization time and front and rear LED displays,
multiple operators can efficiently utilize one scale for the same job.
• Stainless Steel Version Offered with Extra Check Weighing Mode-The Valor
2000 stainless steel models feature an easy to clean, rigid and protective 304
stainless steel top housing with check weighing mode, expanding its
functionality.

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Cookie	Duration	Description
__utma	2 years	Used to distinguish users and sessions. The cookie is created when the javascript library executes and no existing __utma cookies exists. The cookie is updated every time data is sent to Google Analytics.
__utmb	30 mins	Used to determine new sessions/visits. The cookie is created when the javascript library executes and no existing __utmb cookies exists. The cookie is updated every time data is sent to Google Analytics.
__utmc	End of browser session	Using by Google Analytics. Not used in ga.js. Set for interoperability with urchin.js. Historically, this cookie operated in conjunction with the __utmb cookie to determine whether the user was in a new session/visit.
__utmv	2 years	Used to store visitor-level custom variable data. This cookie is created when a developer uses the _setCustomVar method with a visitor level custom variable. This cookie was also used for the deprecated _setVar method. The cookie is updated every time data is sent to Google Analytics.
__utmz	6 months	Stores the traffic source or campaign that explains how the user reached your site. The cookie is created when the javascript library executes and is updated every time data is sent to Google Analytics.
message	-	This cookie is used to identify a website visitor that logged in or not. It contains a token that is used to know the website visitor status.