MITUTOYO SERIES 505 DIAL CALIPER

Download: Mitutoyo Series 505 Data Sheet

SPECIFICATIONS

Metric 1mm Per One Revolution

Range	Order No.	Accuracy	Graduation	Remarks
0-150mm	505-732	+/-0.03mm	0.01mm	—
0-200mm	505-733	+/-0.03mm	0.01mm	—

Metric 2mm Per One Revolution

Range	Order No.	Accuracy	Graduation	Remarks
0-150mm	505-730	+/-0.03mm	0.02mm	—
0-150mm	505-734	+/-0.03mm	0.02mm	Carbide-tipped jaws for OD measurement
0-150mm	505-735	+/-0.03mm	0.02mm	Carbide-tipped jaws for OD & ID measurement
0-200mm	505-731	+/-0.03mm	0.02mm	—
0-300mm	505-745	+/-0.04mm	0.02mm	—

Inch .1” Per Revolution

Range	Order No.	Accuracy	Graduation	Remarks
0-6”	505-742	+/-.001”	.001”	–
0-6”	505-742-51	+/-.001”	.001”	Blue Dial Face
0-6”	505-742-52	+/-.001”	.001”	Purple Dial Face
0-6”	505-742-53	+/-.001”	.001”	Green Dial Face
0-6”	505-742-54	+/-.001”	.001”	Red Dial Face
0-6”	505-742-55	+/-.001”	.001”	Orange Dial Face
0-6”	505-742-56	+/-.001”	.001”	Black Dial Face
0-6”	505-736	+/-.001”	.001”	Carbide-tipped jaws for OD measurement
0-6”	505-738	+/-.001”	.001”	Carbide-tipped jaws for OD & ID measurement
0-8”	505-743	+/-.002”	.001”	–
0-8”	505-737	+/-.002”	.001”	Carbide-tipped jaws for OD measurement
0-8”	505-739	+/-.002”	.001”	Carbide-tipped jaws for OD & ID measurement
0-12”	505-746	+/-.002”	.001”	—
0-12”	505-747	+/-.002”	.001”	Carbide-tipped jaws for OD measurement
0-12”	505-748	+/-.002”	.001”	Carbide-tipped jaws for OD & ID

Inch .2” Per Revolution

Range	Order No.	Accuracy	Graduation	Remarks
0-6”	505-740	+/-.001”	.001”	—
0-6”	505-744	+/-.001”	.001”	Carbide-tipped jaws for OD measurement
0-8”	505-741	+/-.002”	.001”	—
0-12”	505-749	+/-.002”	.001”	—
0-12”	505-750	+/-.002”	.001”	Carbide-tipped jaws for OD measurement

MITUTOYO SERIES 505 SUPER CALIPES – SOLAR POWERED

Download: Mitutoyo Series 500 Data Sheet

SPECIFICATIONS

Metric

Range	Order No.	Accuracy	Resolution
0 – 150mm	500-776	±0.02mm	0.01mm
0 – 150mm	500-774*	±0.02mm	0.01mm
0 – 200mm	500-777	±0.02mm	0.01mm
0 – 200mm	500-775*	±0.02mm	0.01mm

*Without SPC data output

Inch/Metric

Range	Order No.	Accuracy	Resolution
0 – 6″ / 0 – 150mm	500-786	±.001”	.0005” / 0.01mm
0 – 6″ / 0 – 150mm	500-784*	±.001”	.0005” / 0.01mm
0 – 8″ / 0 – 200mm	500-787	±.001”	.0005” / 0.01mm
0 – 8″ / 0 – 200mm	500-785*	±.001”	.0005” / 0.01mm

*Without SPC data output

MITUTOYO SERIES 506 VERNIER HEIGHT GAGE

Download: Mitutoyo Series 506 Data Sheet

SPECIFICATIONS

Metric

Range	Order No.	Accuracy	Graduation	Mass (kg)
0 – 200mm	506-207	±0.03mm	0.02mm	1.4

Inch/Metric Inch model with inch/metric double scale

Range	Order No.	Accuracy	Graduation	Mass (kg)
0 – 8” / 0 – 200mm	506-208	±.001”	.001” / 0.02mm	1.4

MITUTOYO SERIES 513 DIAL TEST INDICATORS

Download: Mitutoyo Series 513 Data Sheet

SPECIFICATIONS

Inch

Graduation	Order No.		Range	Accuracy	Dial reading	Measuring force	L (mm)
Graduation	Basic set	Full set	Range	Accuracy	Dial reading	Measuring force	L (mm)
.00005”	513-407-10E	513-407-10T	.008”	±.0001”	0-4-0	0.3N or less	19
.0005”	513-402-10E	513-402-10T	.03”	±.0005”	0-15-0	0.3N or less	19.9
.0005”	513-472-10E*		.03″	±.0005″	0-15-0	0.3N or less	19.9
.0005”	513-412-10E	513-412-10T	.03”	±.0005”	0-15-0	0.2N or less	33.9
.0005”	513-479-10E*		.03″	±.0005″	0-15-0	0.2N or less	33.9
.0005”	513-462-10E		.03”	±.0005”	0-15-0	0.3N or less	19.9
.0001”	513-403-10E	513-403-10T	.008”	±.0001”	0-4-0	0.3N or less	19
.0001”	513-473-10E*		.008″	±.0001″	0-4-0	0.3N or less	19
.0001”	513-463-10E		.008”	±.0001”	0-4-0	0.3N or less	15

*Provided with a ø2mm ruby contact point as a substitute for ø2mm carbide contact point.

Metric

Graduation	Order No.		Range	Accuracy	Dial reading	Measuring force	L (mm)
Graduation	Basic set	Full set	Range	Accuracy	Dial reading	Measuring force	L (mm)
0.01mm	513-424-10E	513-424-10T	0.5mm	5μm	0-25-0	0.3N or less	22.3
0.01mm	513-414-10E	513-414-10T	0.5mm	10μm	0-25-0	0.2N or less	36.8
0.01mm	513-466-10E	–	0.5mm	5μm	0-25-0	0.3N or less	22.3
0.01mm	513-478-10E*	–	0.5mm	5μm	0-25-0	0.3N or less	22.3
0.01mm	513-404-10E	513-404-10T	0.8mm	8μm	0-40-0	0.3N or less	20.9
0.01mm	513-474-10E*	–	0.8mm	8μm	0-40-0	0.3N or less	20.9
0.01mm	513-464-10E	–	0.8mm	8μm	0-40-0	0.3N or less	20.9
0.01mm	513-415-10E	513-415-10T	1mm	10μm	0-50-0	0.2N or less	44.5
0.01mm	513-477-10E*	–	1mm	10μm	0-50-0	0.2N or less	44.5
0.01mm	513-426-10E	–	1.5mm	16μm	0-25-0	0.4N or less	22.3
0.002mm	513-405-10E	513-405-10T	0.2mm	4μm	0-100-0	0.3N or less	14.7
0.002mm	513-465-10E	–	0.2mm	4μm	0-100-0	0.3N or less	14.7
0.002mm	513-475-10H*	–	0.2mm	4μm	0-100-0	0.3N or Less	18.7
0.002mm	513-425-10E	–	0.6mm	7μm	0-100-0	0.4N or less	14.7
0.001mm	513-401-10E	–	0.14mm	4μm	0-70-0	0.3N or less	12.8
0.001mm	513-471-10E*	–	0.14mm	4μm	0-70-0	0.3N or less	12.8

*Provided with a ø2mm ruby contact point as a substitute for ø2mm carbide contact point.

Metric/inch

Graduation	Order No. Basic set	Order No. Full set	Range	Accuracy	Dial reading	Measuring force	L (mm)
0.002mm, .0001”	513-409-10E	513-409-10T	0.2mm, .0075”	3µm	0-10-0, 0-38-0	0.3N or less	14.7

Inch/Metric

Graduation	Order No. Basic set	Order No. Full set	Range	Accuracy	Dial reading	Measuring force	L (mm)
.0005”, 0.01mm	513-406-10E	513-406-10T	.03”, 0.7mm	±.0005”	0-15-0, 0-35-0	0.3N or less	19.9

MITUTOYO SERIES 513 DIAL TEST INDICATORS

Download: Mitutoyo Series 513 Data Sheet

SPECIFICATIONS

Metric Horizontal (20° tilted face) type

Graduation	Order No. Basic set	Order No. Full set	Range	Accuracy	Dial reading	Measuring force	Mass (g)	L (mm)
0.01mm	513-444-10E	513-444-10T	1.6mm	10µm	0-40-0	0.3N or less	48	20.9
0.002mm	513-445-10E	513-445-10T	0.4mm	5µm	0-100-0	0.3N or less	48	14.7

Inch Horizontal (20° tilted face) type

Graduation	Order No.		Range	Accuracy	Dial reading	Measuring force	Mass (g)	L (mm)	Remarks
Graduation	Basic set	Full set	Range	Accuracy	Dial reading	Measuring force	Mass (g)	L (mm)	Remarks
.0005”	513-442-10A	513-442-10T	.06”	±.0005”	0-15-0	0.3N or less	48	19.9	—
.0005”	513-442-16A	513-442-16T	.06”	±.0005”	0-15-0	0.3N or less	48	19.9	Black dial
.0005”	513-446-10A	513-446-10T	.06”	±.0005”	0-15-0	0.2N or less	48	33.9	—
.0005”	513-446-16A	513-446-16T	.06”	±.0005”	0-15-0	0.2N or less	48	33.9	Black dial
.0001”	513-443-10A	513-443-10T	.016”	±.0002”	0-4-0	0.3N or less	48	15	—
.0001”	513-443-16A	513-443-16T	.016”	±.0002”	0-4-0	0.3N or less	48	15	Black dial

Metric Vertical type

Graduation	Order No. Basic set	Order No. Full set	Range	Accuracy	Dial reading	Measuring force	Mass (g)	L (mm)
0.01mm	513-454-10E	513-454-10T	0.8mm	8µm	0-40-0	0.3N or less	50	20.9
0.002mm	513-455-10E	513-455-10T	0.2mm	3µm	0-100-0	0.3N or less	50	14.7

Inch Vertical type

Graduation	Order No. Basic set	Order No. Full set	Range	Accuracy	Dial reading	Measuring force	Mass (g)	L (mm)
.0005”	513-452-10E	513-452-10T	.03”	±.0005”	0-15-0	0.3N or less	50	19.9
.0001”	513-453-10E	513-453-10T	.008”	±.0001”	0-4-0	0.3N or less	50	19

Metric Parallel type

Graduation	Order No. Basic set	Order No. Full set	Range	Accuracy	Dial reading	Measuring force	Mass (g)	L (mm)
0.01mm	513-484-10E	513-484-10T	0.8mm	8µm	0-40-0	0.3N or less	68	20.9

Inch Parallel type

Graduation	Order No. Basic set	Order No. Full set	Range	Accuracy	Dial reading	Measuring force	Mass (g)	L (mm)
.0005”	513-482-10A	513-482-10T	.03”	±.0005”	0-15-0	0.3N or less	68	20

MITUTOYO SERIES 513 POCKET DIAL TEST INDICATORS

Download: Mitutoyo Series 513 Data Sheet

SPECIFICATIONS

Metric

Graduation	Order No. Basic set	Order No. Full set	Range	Accuracy	Dial reading	Measuring force	L (mm)
0.01mm	513-514E	513-514T	0.5mm	10µm	0-25-0	0.3N or less	36.8
0.01mm	513-517E	513-517T	0.8mm	8µm	0-40-0	0.3N or less	20.9
0.01mm	513-527E	513-527T	0.8mm	8µm	0-40-0	0.3N or less	14.7
0.01mm	—	513-515T	1mm	10µm	0-50-0	0.3N or less	44.5
0.002mm	513-503E	513-503T	0.2mm	3µm	0-100-0	0.3N or less	14.7
0.001mm	513-501E	513-501T	0.14mm	3µm	0-70-0	0.4N or less	12

Inch

Graduation	Order No. Basic set	Order No. Full set	Range	Accuracy	Dial reading	Measuring force	L (mm)
.001”	513-518	513-518T	.04”	±.001”	0-20-0	0.3N or less	26.5
.001”	513-528	513-528T	.04”	±.001”	0-20-0	0.3N or less	18.7
.0005”	513-512	513-512T	.02”	±.0005”	0-10-0	0.3N or less	37.4
.0001”	513-504	513-504T	.01”	±.0002”	0-5-0	0.3N or less	18.7

Optional Contact Points

Pocket Type

Order No.		1mm	2mm	3mm	0.5mm	0.7mm
513-501E		136756	136104	136758	—	—
513-503E	513-527E	103017	103010	103018	190547	190548
513-504	513-528	131314	103011	131315	—	—
513-512		131316	131324	131317	—	—
513-514E		137746	129949	137747	—	—
513-515T		136235	136013	136236	190656	190655
513-517E		103013	103006	103014	190549	190550
513-518		103008	103007	103009	—	—

MITUTOYO SERIES 527 VERNIER DEPTH GAGE

Download: Mitutoyo Series 527 Data Sheet

SPECIFICATIONS

Metric

Range	Order No.	Vernier reading	Accuracy	Mass (g)	Remarks
0 – 150mm	527-201	0.05mm	±0.05mm	240	–
0 – 150mm	527-121	0.02mm	±0.03mm	215	–
0 – 150mm	527-101	0.02mm	±0.03mm	280	with fine adjustment
0 – 200mm	527-202	0.05mm	±0.05mm	260	–
0 – 200mm	527-122	0.02mm	±0.03mm	230	–
0 – 200mm	527-102	0.02mm	±0.03mm	300	with fine adjustment
0 – 300mm	527-203	0.05mm	±0.08mm	300	–
0 – 300mm	527-123	0.02mm	±0.04mm	265	–
0 – 300mm	527-103	0.02mm	±0.04mm	350	with fine adjustment
0 – 600mm	527-204	0.05mm	±0.10mm	1511	–
0 – 600mm	527-104	0.02mm	±0.05mm	1511	with fine adjustment
0 – 1000mm	527-205	0.05mm	±0.15mm	1880	–
0 – 1000mm	527-105	0.02mm	±0.07mm	1880	with fine adjustment

Inch

Range	Order No.	Vernier reading	Accuracy	Mass (g)	Remarks
0 – 6”	527-111	.001”	±.001”	280	with fine adjustment
0 – 8”	527-112	.001”	±.001”	300	with fine adjustment
0 – 12”	527-113	.001”	±.0015”	350	with fine adjustment
0 – 24”	527-114	.001”	±.002”	1511	with fine adjustment
0 – 40”	527-115	.001”	±.003”	1880	with fine adjustment

MITUTOYO SERIES 530 VERNIER CALIPER

Download: Mitutoyo Series 530 Data Sheet

SPECIFICATIONS

Metric

Range	Order No.	Accuracy	Graduation	Remarks
0 – 150mm	530-102	±0.05mm	0.05mm	ø 1.9mm Depth bar
0 – 150mm	530-101	±0.05mm	0.05mm	—
0 – 150mm	530-320	±0.05mm	0.05mm	Carbide-tipped jaws for OD measurement
0 – 150mm	530-335	±0.05mm	0.05mm	Carbide-tipped jaws for OD & ID measurement
0 – 150mm	530-122*	±0.03mm	0.02mm	High-accuracy model
0 – 200mm	530-108	±0.05mm	0.05mm	—
0 – 200mm	530-321	±0.05mm	0.05mm	Carbide-tipped jaws for OD measurement
0 – 200mm	530-123*	±0.03mm	0.02mm	High-accuracy model
0 – 300mm	530-109	±0.08mm	0.05mm	—
0 – 300mm	530-322	±0.08mm	0.05mm	Carbide-tipped jaws for OD measurement
0 – 300mm	530-124*	±0.04mm	0.02mm	High-accuracy model: ±0.04mm
0 – 600mm	530-501**	±0.1mm	0.05mm	—
0 – 1000mm	530-502 **	±0.15mm	0.05mm	—

*Graduation: 0.02mm
**No depth measuring bar

Metric/Inch with metric/inch dual scale

Range	Order No.	Accuracy	Vernier Graduation		Remarks
Range	Order No.	Accuracy	Lower Scale	Upper Scale	Remarks
0 – 150mm / 0 – 6”	530-104	±0.05mm	0.05mm	1/128″	—
0 – 150mm / 0 – 6”	530-316	±0.05mm	0.05mm	1/128″	—
0 – 150mm / 0 – 6”	530-312*	±0.03mm	0.02mm	.001″	High-accuracy model
0 – 200mm / 0 – 8”	530-114	±0.05mm	0.05mm	1/128″	—
0 – 200mm / 0 – 8”	530-118*	±0.03mm	0.02mm	.001″	High-accuracy model
0 – 300mm / 0 – 12”	530-115	±0.08mm	0.05mm	1/128″	—
0 – 300mm / 0 – 12”	530-119*	±0.04mm	0.02mm	.001″	High-accuracy model

*Graduation: 0.02mm

Inch with inch/inch dual scale

Range	Order No.	Accuracy	Vernier Graduation		Remarks
Range	Order No.	Accuracy	Lower Scale	Upper Scale
0 – 6″	530-105	±.0015”	.001”	1/128″	—
0 – 8″	530-116	±.0015”	.001”	1/128″	—

MITUTOYO SERIES 531 VERNIER CALIPER

Download: Mitutoyo Series 531 Data Sheet

SPECIFICATIONS

Metric

Range	Order No.	Accuracy	Graduation	Remarks
0 – 150mm	531-101	±0.05mm	0.05mm	—
0 – 200mm	531-102	±0.05mm	0.05mm	—
0 – 300mm	531-103	±0.08mm	0.05mm	—

Metric/Inch with metric/inch dual scale

Range	Order No.	Accuracy	Graduation		Remarks
Range	Order No.	Accuracy	Lower Scale	Upper Scale	Remarks
0 – 150mm / 0 – 6″	531-122	±0.05mm	0.05mm	1/128″	with inch/mm conversion label
0 – 150mm / 0 – 6″	531-128	±0.03mm	0.02mm	.001”	High-accuracy model
0 – 200mm / 0 – 8”	531-108	±0.05mm	0.05mm	1/128″	—
0 – 200mm / 0 – 8”	531-129	±0.03mm	0.02mm	.001”	High-accuracy model
0 – 300mm / 0 – 12”	531-109	±0.08mm	0.05mm	1/128″	—
0 – 300mm / 0 – 12”	531-112	±0.04mm	0.02mm	.001”	High-accuracy model

MITUTOYO SERIES 532 VERNIER CALIPER

Download: Mitutoyo Series 532 Data Sheet

SPECIFICATIONS

Metric

Range	Order No.	Accuracy	Graduation
0 – 130mm	532-101	±0.03mm	0.02mm
0 – 180mm	532-102	±0.03mm	0.02mm
0 – 280mm	532-103	±0.04mm	0.02mm

Metric/Inch with metric/inch dual scale

Range	Order No.	Accuracy	Graduation
Range	Order No.	Accuracy	Lower Scale	Upper Scale
0 – 130mm / 0 – 5”	532-119	±0.03mm	0.02mm	.001″
0 – 180mm / 0 – 7”	532-120	±0.03mm	0.02mm	.001″
0 – 280mm / 0 – 11”	532-121	±0.04mm	0.02mm	.001″

MITUTOYO SERIES 534 LONG-JAW VERNIER CALIPER

Download: Mitutoyo Series 534 Data Sheet

SPECIFICATIONS

Metric with metric/metric dual scale without fine adjustment

Range*	Order No.	Accuracy	Graduation		Mass (g)
Range*	Order No.	Accuracy	Lower Scale	Upper Scale	Mass (g)
0 (10) – 300mm	534-109	±0.07mm	0.05mm	0.05mm	400
0 (20) – 500mm	534-110	±0.13mm	0.05mm	0.05mm	1,400

*( ): Minimum dimension in ID measurement

Metric with metric/metric dual scale

Range*	Order No.	Accuracy	Graduation		Mass (g)
Range*	Order No.	Accuracy	Lower Scale	Upper Scale	Mass (g)
0 (10) – 300mm	534-113	±0.04mm	0.02mm	0.02mm	460
0 (20) – 500mm	534-114	±0.06mm	0.02mm	0.02mm	1,500
0 (20) – 750mm	534-115	±0.08mm	0.02mm	0.02mm	2,900
0 (20) – 1000mm	534-116	±0.10mm	0.02mm	0.02mm	3,500

*( ): Minimum dimension in ID measurement

Metric/Inch with metric/inch dual scale

Range*	Order No.	Accuracy	Graduation		Mass (g)
Range*	Order No.	Accuracy	Lower Scale	Upper Scale	Mass (g)
0 (10) – 300mm / 0 (.3”) – 12″	534-101	±0.07mm	0.05mm	1/128”	460
0 (10) – 300mm / 0 (.3”) – 12″	534-105	±0.04mm	0.02mm	.001”	460
0 (20) – 500mm / 0 (.8”) – 20″	534-102	±0.13mm	0.05mm	1/128”	1,500
0 (20) – 500mm / 0 (.8”) – 20″	534-106	±0.06mm	0.02mm	.001”	1,500
0 (20) – 700mm / 0 (.8”) – 30″	534-103	±0.16mm	0.05mm	1/128”	2,900
0 (20) – 700mm / 0 (.8”) – 30″	534-107	±0.08mm	0.02mm	.001”	2,900
0 (20) – 1000mm / 0 (.8”) – 40″	534-104	±0.20mm	0.05mm	1/128”	3,500
0 (20) – 1000mm / 0 (.8”) – 40″	534-108	±0.10mm	0.02mm	.001”	3,500

*( ): Minimum dimension in ID measurement

Inch with inch/inch dual scale

Range*	Order No.	Accuracy	Graduation		Mass (g)
Range*	Order No.	Accuracy	Lower Scale	Upper Scale	Mass (g)
0 (.3”) – 12″	534-117	±.002″	.001”	.001”	400
0 (.8”) – 20″	534-118	±.003″	.001”	.001”	1500
0 (.8”) – 30″	534-119	±.004″	.001”	.001”	2900
0 (.8”) – 40″	534-120	±.004″	.001”	.001”	3500

*( ): Minimum dimension in ID measurement

MITUTOYO SERIES 536 – ABSOLUTE DIGIMATIC AND VERNIER TYPES POINT CALIPER

Download: Mitutoyo series 536 – Point Caliper

• Narrow-tip jaws fit into very small grooves and tracks.
• Allows step measurement.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.

SPECIFICATIONS

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
536-121	0 – 150	0.05	±0.05	±0.07

• With depth bar
* Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.

MITUTOYO SERIES 536 – ABSOLUTE DIGIMATIC AND VERNIER TYPES POINT CALIPER

Download: Mitutoyo series 536 – Point Caliper

• Narrow-tip jaws fit into very small grooves and tracks.
• Allows step measurement.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.

SPECIFICATIONS

Order No	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
536-121	0 – 150	0.05	±0.05	±0.07

• With depth bar
* Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.

MITUTOYO SERIES 536 – VERNIER TYPE OFFSET CALIPER

Download: Mitutoyo SERIES 536 — Vernier type Offset Caliper

This Offset Caliper enables you to measure stepped workpieces and offers you the following benefits:

The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-to-get-at workpiece features.

SPECIFICATIONS

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
Order No.	Range (mm)	Resolution (mm)	EMPE	SMPE
536-101	0 – 150	0.05	±0.05	±0.07
536-102	0 – 200		±0.05	±0.07
536-103	0 – 300		±0.08	±0.10

MITUTOYO SERIES 536 – VERNIER TYPE OFFSET CALIPER

Download: Mitutoyo SERIES 536 — Vernier type Offset Caliper

This Offset Caliper enables you to measure stepped workpieces and offers you the following benefits:

The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-to-get-at workpiece features.

SPECIFICATIONS

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
Order No.	Range (mm)	Resolution (mm)	EMPE	SMPE
536-101	0 – 150	0.05	±0.05	±0.07
536-102	0 – 200		±0.05	±0.07
536-103	0 – 300		±0.08	±0.10

MITUTOYO SERIES 536 – VERNIER TYPE OFFSET CENTERLINE CALIPER

Download: Mitutoyo SERIES 536 – Vernier type Offset Centerline Caliper

This Offset Caliper enables you to measure stepped workpieces and offers you the following benefits:

The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-to-get-at workpiece features.

SPECIFICATIONS

Order No.	Range (mm)	Resolution (mm)	*Maximum permissible error (mm)2**
			EMPE	SMPE
536-105	10.1 – 150	0.05	–	±0.05
536-106	10.1 – 200			±0.05
536-107	10.1 – 300			±0.08

* Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Cookie	Duration	Description
__utma	2 years	Used to distinguish users and sessions. The cookie is created when the javascript library executes and no existing __utma cookies exists. The cookie is updated every time data is sent to Google Analytics.
__utmb	30 mins	Used to determine new sessions/visits. The cookie is created when the javascript library executes and no existing __utmb cookies exists. The cookie is updated every time data is sent to Google Analytics.
__utmc	End of browser session	Using by Google Analytics. Not used in ga.js. Set for interoperability with urchin.js. Historically, this cookie operated in conjunction with the __utmb cookie to determine whether the user was in a new session/visit.
__utmv	2 years	Used to store visitor-level custom variable data. This cookie is created when a developer uses the _setCustomVar method with a visitor level custom variable. This cookie was also used for the deprecated _setVar method. The cookie is updated every time data is sent to Google Analytics.
__utmz	6 months	Stores the traffic source or campaign that explains how the user reached your site. The cookie is created when the javascript library executes and is updated every time data is sent to Google Analytics.
message	-	This cookie is used to identify a website visitor that logged in or not. It contains a token that is used to know the website visitor status.